Best Accessories for Hasselblad X2D II 100C
The Hasselblad X2D II 100C is not a grip camera, and it is not the 2022 X2D 100C. One 7.27 V / 3400 mAh cell in the box, CIPA 327 frames (466 if preview is Hold and HDR is off), USB-C that is also the 10 Gbit/s dump port, and still no video. The first extra you actually run out of is power. The 2026 spare that matches the datasheet is the Hasselblad High Capacity Li-ion Battery for X System (3400 mAh). Do not buy a “X2D battery grip,” a 907X control grip, or a CFV 100C back and call it an X2D II accessory.
Our Top Picks at a Glance
Updated August 2026 · Hasselblad X2D II 100C · 3400 mAh in-body · shutter-control port is new vs X2D 100C
CP.HB.00000238 class. Same 3400 mAh cell the II ships with. One spare doubles a 327-shot CIPA day.
Check Price at Amazonat Amazon Read full review ↓Two 3400 mAh cells in 2 h 48 min without occupying the camera’s USB-C dump port.
Check Price at Amazonat Amazon Read full review ↓The II added a shutter-control port. First-gen X2D 100C cannot use this cord. ~$80, 90 cm.
Check Price at Amazonat Amazon Read full review ↓Disclosure: This page contains affiliate links. As an Amazon Associate affiliate, we earn a small commission from qualifying purchases at no extra cost to you.
Comparison Table
| Product | Job on X2D II | Official / fit | Price | Buy |
|---|---|---|---|---|
| 3400 mAh X System battery | Spare magazine | Ships in the body · CP.HB.00000238 | $90–$110 | Check |
| Battery Charging Hub | Charge two cells, free USB-C | 3400 + 3200 mAh · CPHB.00000394 | $150–$200 | Check |
| Release Cord X | Wired shutter | II shutter-control port only | $70–$90 | Check |
| Peak Design Slide | Replace the in-box strap | Lugs · 45 mm · SL-BK-3 class | $70–$85 | Check |
| RRS X2D MkII L-Plate | Arca portrait / tripod | RRS lists X2D and X2D MkII | $240–$270 | Check |
Street prices move. The card and the bag have their own URLs. This page sells power, the new shutter port, and the two pieces that change how the 840 g body (with battery) actually gets used.
How We Picked These Accessories
- Hasselblad’s X2D II 100C datasheet (26 Aug 2025): Body 148.5 × 106 × 75 mm; 840 g with battery, 730 g body only. Li-ion 7.27 V DC / 3400 mAh. Charge via USB-C; about two hours with the official 30 W USB-C charger and USB-C cable. CIPA 327 shots; 466 when preview is Hold and HDR is off (footnote: XCD 4/28P). USB 3.1 Gen2 Type-C, theoretical 10 Gbit/s. Extra port: shutter control, supporting Release Cord X. Hot shoe. 1/4″ tripod socket. Built-in 1 TB SSD plus CFexpress Type B max 512 GB. Mechanical + electronic shutter; leaf shutter 68 min to 1/4000 s on XCD. No video line. IBIS 5-axis, 10-stop centre / 8-stop edges. AF-C + LiDAR — that is why a second battery is not a “nice extra” on a 3 fps 206 MB body.
- What Hasselblad puts in the box and on the accessory wall: US/most kits: body, one 3400 mAh cell + cover lid, 30 W USB-C charger (omitted in Europe), USB-C to USB-C cable, shoulder strap. Store add-ons next to the II: High Capacity battery, Battery Charging Hub ($155 on the NA store), Release Cord X ($80), Vandra strap, Vandra backpack, UV/CPL/ND8, XH Converter 0,8, XV / XPan / XH adapters, Extension Tube X 9 mm. Hub copy: dual slots, USB-C in, 3400 mAh one cell in 2 h 18 min / two cells in 2 h 48 min, 3200 mAh first-gen cells in ~3 h. Battery copy: 7.27 V 3400 mAh replaces 7.2 V 3200 mAh.
- The II-only port, and the products this URL used to sell by habit: Capture Integration’s II vs X2D note: original X2D 100C has no shutter-control port; the II adds it for Release Cord X (CP.HB.00000242.01, 90 cm). X1D-era listings still say “microphone input” — that is the old body, not this one. There is no electronic vertical grip and no extra battery in a grip. RRS now titles the L-bracket set for X2D and X2D MkII; some owners still report the vertical arm crowding the II battery door, so check that before you treat it as a daily plate. CFexpress and bags are not re-sold here — use the dedicated card and bag pages.
Best Accessories for Hasselblad X2D II 100C: Detailed Reviews
Hasselblad High Capacity Li-ion Battery (X System, 3400 mAh) View on Amazon View on B&H
| SKU | Hasselblad High Capacity Li-ion Rechargeable Battery for X System. 3400 mAh, not the old 3200 mAh silkscreen as the thing you hunt for. |
|---|---|
| On X2D II | Identical to the in-box cell. CIPA 327 / 466 Hold + HDR off. In-body USB-C charge ~2 h on the 30 W brick. |
| Also fits | X1D / X1D II / X2D 100C / 907X + CFV — same X System pack. Hub charges 3200 and 3400. |
| Buy this listing | Hasselblad 3400 mAh X System. Not a “generic X2D battery” with a guessed pinout. Not a 907X-only oddity. |
Why it fits the X2D II 100C. The body is 7.5% lighter than X2D 100C and still a 100 MP camera writing ~206 MB 3FR files, now with AF-C, LiDAR, 10-stop IBIS, and HNCS HDR. Hasselblad’s own endurance footnote is the XCD 4/28P. Preview Hold plus HDR on will not match the 466-shot number. USB-C charging works, and it occupies the only fast dump port while it does. A second official 3400 mAh pack is the accessory that actually changes a shoot. Format nothing; seat the cell fully; the cover lid in the box is for the empty slot in the kit, not a third battery.
Skip this if you already own two 3400 mAh X System cells. a 3200 mAh from an X1D will power the II; it just charges slower on the hub and is not the cell Hasselblad prints on the II sheet.
- Same cell the datasheet names
- Swaps without tying up USB-C
- Works in the Charging Hub
- OEM price vs mystery cells
- Does not add a vertical shutter
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
Hasselblad Battery Charging Hub View on Amazon View on B&H
| SKU | Hasselblad Battery Charging Hub for X Series (CPHB.00000394.01 class). Dual bays, USB-C, included mains supply. |
|---|---|
| 3400 mAh | One cell ~2 h 18 min. Two cells ~2 h 48 min. Hasselblad: ~25% faster than 3200 mAh. |
| 3200 mAh | Still charges, ~3 h to full. Chime at complete. Button-check capacity without a camera. |
| Power in | Mains brick in the hub kit, or a USB battery bank (sold separately). Not a substitute for the II’s in-body 30 W charge spec. |
Why it fits the X2D II 100C. In-camera charge is real (~2 h on the official 30 W charger) and it parks a $7,800 body on a cable that you also need for 10 Gbit/s SSD offload. The hub is how you keep two 3400 mAh packs rotating without that collision. Front LEDs plus a one-button level check are why it is not “any USB-C PD dock.” Hasselblad’s NA store prices it next to the II at $155. Buy it with a second cell, not instead of one — an empty hub does not raise CIPA 327.
Skip this if you own one battery and charge overnight in-body. Skip third-party dual chargers that do not name 3400 mAh X System packs. Skip treating a 65 W laptop brick as a hub; that still occupies the camera.
- Frees the camera USB-C port
- Charges the cell the II actually uses
- Keeps 3200 mAh X1D packs useful
- Needs a spare battery to matter
- Not a grip, not extra mAh in the body
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
Hasselblad Release Cord X View on Amazon View on B&H
| SKU | Hasselblad Release Cord X (CP.HB.00000242.01). ~$80 on the NA store. Leather pouch in the box. |
|---|---|
| X2D II | Datasheet extra port: shutter control, supporting Release Cord X. Half-press AF then fire; hold for Continuous; MF fires immediately. |
| X2D 100C (2022) | No shutter-control port. This cord does not invent one. Do not buy it for a first-gen X2D. |
| X1D / CFV II | Older copy talks about a microphone input. That is those bodies. The II is a dedicated shutter-control jack. |
Why it fits the X2D II 100C. Leaf shutter to 68 minutes, focus bracketing, 10-stop IBIS that still wants a still camera for a 100 MP file — a finger on the body is the cheap way to waste that. The II is the X System flagship that finally has the jack. It is not IR, not ML-L7 Bluetooth, not a 907X grip button. One metal release, 90 cm of cloth cable. Continuous hold works in Continuous drive. Pair it with the spare battery so the bracket run is not also a charge-cable run.
Skip this if you only ever fire handheld AF-C and never use a tripod. Skip generic 2.5 mm “Canon” releases. Skip listings that only name X1D and never X2D II — pinouts were already a forum sport on the 50 MP bodies.
- The II-only port accessory
- Official ~$80 cable, not a $300 grip fantasy
- Works in MF without AF delay
- Useless on original X2D 100C
- 90 cm — not a 10 m studio run
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
If You Need Something Else
These are not cheaper 3400 mAh packs. One replaces the strap already in the box. One is an Arca L-plate RRS now titles for MkII. Neither is a battery grip.
Peak Design Slide Camera Strap View on Amazon View on B&H
| Need | 45 mm internally padded Slide (SL-BK-3 class). Not Slide Lite on an 840 g body plus XCD glass. |
|---|---|
| On X2D II | Anchors through the strap lugs. Quick-off for tripod. In-box Hasselblad shoulder strap already exists. |
| Skip | Vandra Camera Strap unless you want the OEM leather at ~$249–$299. X1D II 50C strap. Slide Lite as the default. |
The kit strap works. Slide is the $80 version that comes off in one click when the Release Cord and a tripod are the point of the afternoon. 39–57 in, 1.8 in / 45 mm, Peak Design’s 200 lb anchor rating is marketing headroom — the camera is 840 g with a battery, not 90 kg. Loop the Anchors through Hasselblad’s lugs; do not drill anything. Vandra backpack stays on the bag page.
Skip this if the in-box strap is fine. Skip it as a “Top Choice” equal to a spare battery — it is not.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
Really Right Stuff X2D / X2D MkII L-Plate Set View on Amazon View on B&H
| Need | Arca landscape/portrait without a collapsing ballhead. RRS names Hasselblad X2D and X2D MkII. |
|---|---|
| Not this | An electronic battery grip. SmallRig “L-shape grip” sold as extra mAh. X1D II vertical grip — different base, no contacts. |
| Fit note | RRS lists MkII. At least one owner says the vertical arm crowds the II battery door. Confirm door + ports before you daily it. |
The II is 1 mm thicker than X2D 100C (75 mm vs 74.5 mm) and 60 g lighter without battery. A first-gen “X2D L-plate” listing that never says MkII is a returns risk. This set is the tripod accessory, not power. If you came here from a “best X2D battery grip” search: Hasselblad does not make one. USB-C + spare 3400 mAh is the power path. A 1/4″ socket is already on the base.
Skip this if you rarely rotate to portrait on a clamp. Skip every product titled battery grip for this body.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
Frequently Asked Questions
Does the X2D II 100C take a battery grip?
No. There is no official electronic vertical grip and no extra cell in the base. The 907X control grip is for 907X. Spare 3400 mAh batteries and the Charging Hub are the power accessories. An L-plate is a tripod plate, not a grip with a shutter.
Can a 3200 mAh X1D battery run the X2D II?
Yes. Same X System pack family. The II sheet and the in-box cell are 3400 mAh / 7.27 V. The hub still charges 3200 mAh cells (~3 h). Buy 3400 mAh as the spare you pay OEM money for.
Does Release Cord X work on the original X2D 100C?
No. The 2022 X2D 100C has no shutter-control port. The II datasheet adds that jack specifically for Release Cord X. X1D / CFV II listings that say “microphone input” describe those cameras.
Is the 30 W USB-C charger in the box?
Hasselblad: camera, one battery + cover lid, USB-C to USB-C cable, shoulder strap. 30 W USB-C charger varies by region and is not included in Europe. In-body full charge is specified at about two hours with that 30 W charger and cable.
What about a CFexpress card or a backpack?
1 TB SSD in the body; extra slot is CFexpress Type B, max 512 GB. That list lives on the X2D II memory-card guide. Bags belong on a bag page, not as a fifth “Top Choice” next to a battery. Do not reuse the old Vandra 20L + SanDisk 512GB + Peak Design + RRS stack as five equal winners.
Final Verdict
For most Hasselblad X2D II 100C kits, buy a second official 3400 mAh battery first. Add the Charging Hub if you also dump the 1 TB SSD over USB-C. Add Release Cord X if you use a tripod — that jack is the hardware difference versus X2D 100C. Peak Design Slide replaces the in-box strap; an RRS MkII L-plate is for Arca, not for power. Skip battery grips, 907X handles, and CFV backs. Cards and bags have their own pages.