Best Lens Hood for Sony FE 24-70mm f/2.8 GM II
Side light at 24mm is why this zoom ships with a hood. Sony lists the FE 24-70mm F2.8 GM II hood as petal-shaped and bayonet, model ALC-SH168, at 103.9 mm across, 42.0 mm long, and 38.8 g. The lens filter is 82 mm. The full-frame angle at 24mm is 84°. B&H lists the hood at $73, and the barrel is 87.8 mm across. Check the Sony ALC-SH168 on Amazon.
Our Top Picks at a Glance
Reviewed September 2026 · SEL2470GM2 · ALC-SH168 · 82 mm filter
The hood in the GM II box. Sony prints 103.9 × 42.0 mm and 38.8 g. B&H lists it at $73.
Check Price at Amazon Read full review ↓JJC’s bayonet spare for the SEL2470GM2. An Amazon listing is $19.99, which is $53.01 under the $73 ALC-SH168.
Check Price at Amazon Read full review ↓An 82 mm aluminum screw hood, 2.0 cm tall. JJC’s page does not name the GM II.
Check Price at Amazon Read full review ↓This page contains affiliate links. A purchase through those links may earn Cameraegg a commission at no extra cost to you.
| Hood | How it mounts | Published size | Buy |
|---|---|---|---|
| Sony ALC-SH168 | Bayonet hood in the GM II box | 103.9 × 42.0 mm, 38.8 g | Check price |
| JJC LH-SH168 | Bayonet spare; JJC names the SEL2470GM2 | ABS, 82 mm filter still fits | Check price |
| JJC LN-82W | 82 mm screw thread; GM II not named | Hood height 2.0 cm, 43 g net | Check price |
| Sony ALC-SH141 | Bayonet hood Sony names for the first GM | 104.0 × 49.4 mm, 37 g | Check price |
How We Picked
Three sourced facts: the hood model in the GM II box, the size on Sony’s ALC-SH168 page, and the mount each alternative actually uses.
- The included hood is the ALC-SH168. Sony’s SEL2470GM2 specification lists a petal-shaped bayonet hood, an 82 mm filter, a weight of 695 g, and dimensions of 87.8 × 119.9 mm. The angle of view on a 35mm sensor is 84°–34°. What’s in the box names the hood model ALC-SH168, plus front cap ALC-F82S.
- Sony prints the hood’s own size. The ALC-SH168 accessory page lists 103.9 mm by 42.0 mm and about 38.8 g, petal-shaped and bayonet. B&H’s lens-hood category lists this model at $73 for the FE 24-70mm f/2.8 GM II. Adorama also lists $73.00 and marks the hood on backorder. Glazer’s listing and B&H’s bullet both mention a filter adjustment window.
- The other two hoods are not that part. JJC’s LH-SH168 page says it replaces the ALC-SH168 for the SEL2470GM2, in ABS, and that an 82 mm filter and the cap still fit. An Amazon listing of that model is $19.99, and the title says it is not for the Sigma 24-70mm f/2.8 DG DN II. JJC’s LN-82W page is an aluminum screw hood, 8.2 cm thread, hood height 2.0 cm, net 43 g, and it does not name the GM II.
Detailed Reviews
Sony ALC-SH168 View on Amazon View on B&H
| Model | ALC-SH168, for the SEL2470GM2 |
|---|---|
| Mount | Petal shape, bayonet type |
| Size | 103.9 mm diameter × 42.0 mm length |
| Weight | About 38.8 g |
| Listed price | $73 at B&H; $73.00 at Adorama, marked backorder |
Why it fits the FE 24-70mm F2.8 GM II. Sony’s lens page puts the ALC-SH168 in the box and describes the hood type as petal-shaped and bayonet. The accessory page then gives the only dimensions Sony prints for the part: 103.9 mm across, 42.0 mm long, about 38.8 g. The lens barrel is 87.8 mm in diameter, so the hood’s 103.9 mm diameter sits outside that barrel. The front of the lens is an 82 mm filter. Glazer’s listing says the hood has a window for turning a polarizer or a variable ND without taking the hood off, and B&H’s bullet list includes a filter adjustment window. That window is not a line on the lens specification table.
Buy the ALC-SH168 when the hood from the box is missing and the bayonet on this GM II still locks. The $73 figure is the B&H category price, and Adorama’s $73.00 listing is marked backorder, so neither number is an Amazon cart price. Skip a listing that says ALC-SH141. That model belongs to the first FE 24-70mm F2.8 GM, and Sony prints it at a different length.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
JJC LH-SH168 View on Amazon View on B&H
| Model | LH-SH168 |
|---|---|
| Lens JJC names | FE 24-70mm F2.8 GM II (SEL2470GM2) |
| Material | ABS |
| Filter | JJC says an 82 mm filter and the cap still fit |
| Listed price | $19.99 on an Amazon listing of this model |
Why it fits the FE 24-70mm F2.8 GM II. JJC’s LH-SH168 page says the hood is for that lens, replaces the ALC-SH168, and is ABS. It also says an 82 mm filter and the lens cap still fit, and that the hood has a filter adjustment window for a rotating filter. That is the same job Glazer’s description gives the Sony hood. JJC does not print a gram weight or a millimetre size on that page, so this guide does not invent one. The price in hand is the Amazon listing at $19.99, which is $53.01 under B&H’s $73 ALC-SH168 line.
The same Amazon title says the hood is not for the Sigma 24-70mm f/2.8 DG DN II. Match the line LH-SH168 and the lens name SEL2470GM2 on the tile. Skip it when you want the 38.8 g part Sony weighed, or when the listing is for a Sigma 24-70.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
JJC LN-82W View on Amazon View on B&H
| Model | LN-82W |
|---|---|
| Mount | 82 mm screw thread (JJC prints 8.2 cm) |
| Height | Hood height 2.0 cm; real size 10.7 × 10.7 × 2.2 cm |
| Weight | 43 g net, 62 g gross, aluminum |
| GM II on the JJC page | Not named |
Why it can go on this lens, and where it stops. The GM II filter is 82 mm. The LN-82W screws into an 82 mm thread. JJC prints a hood height of 2.0 cm, a front diameter of 10.5 cm, a real size of 10.7 × 10.7 × 2.2 cm, and a net weight of 43 g. The compatible line on that page says “2.4cm and up.” It does not say SEL2470GM2. No US dollar was confirmed for this model. The priced saving is the LH-SH168 at $19.99, not this screw hood.
Buy the LN-82W only when you want a hood on the filter ring and you are not replacing the bayonet part Sony names. A screw hood occupies the thread an 82 mm filter would use. Skip it when the bayonet still works.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
If You Need Something Else
The first FE 24-70mm F2.8 GM, model SEL2470GM, has its own hood. Both lenses use an 82 mm filter. The hood model and the length Sony prints are not the same.
Sony ALC-SH141 View on Amazon View on B&H
| Model | ALC-SH141 |
|---|---|
| Lens Sony names | FE 24-70mm F2.8 GM (SEL2470GM), not the GM II |
| Size | 104.0 × 49.4 mm |
| Weight | About 37 g |
Sony’s Ireland specification for the first GM lists hood ALC-SH141 in the box, and the filter on that page is also 82 mm. Sony’s ALC-SH141 accessory page prints 104.0 × 49.4 mm and about 37 g. The GM II hood is 42.0 mm long, so the first-generation hood is 7.4 mm longer on Sony’s own pages, and 0.1 mm wider. This guide does not treat the two bayonets as one part. Buy the ALC-SH141 for a SEL2470GM. Leave it when the lens in your hand is the SEL2470GM2.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
Frequently Asked Questions
Why the GM II box names ALC-SH168
Sony’s SEL2470GM2 specification lists the hood type as petal-shaped and bayonet, and the box list prints the model ALC-SH168. The accessory page for that model gives 103.9 mm by 42.0 mm and about 38.8 g. A listing that uses ALC-SH141 is the hood Sony names for the earlier SEL2470GM.
What the filter window is for
Glazer’s ALC-SH168 listing says the window is there so a polarizer or a variable ND can be turned without removing the hood. B&H’s bullet list for the same model includes a filter adjustment window. JJC’s LH-SH168 page says that hood has a window for the same kind of rotating filter. The lens specification table itself does not print the window.
Whether an 82 mm filter still fits
The lens filter diameter is 82 mm, and the front cap in the box is the ALC-F82S. JJC says the LH-SH168 still allows an 82 mm filter and the cap. The LN-82W screws into that same thread, so the ring is then occupied by the hood.
What 38.8 g means next to the lens
Sony’s lens weight is 695 g. The hood weight on the ALC-SH168 page is about 38.8 g. The first-generation ALC-SH141 page says about 37 g. Those are hood figures, not a change to the 695 g lens line. JJC’s LN-82W page prints 43 g net.
Why a Sigma 24-70 listing is a different hood
The Amazon title for the JJC LH-SH168 says the hood is not for the Sigma 24-70mm f/2.8 DG DN II. JJC’s own page names the Sony SEL2470GM2. A shared focal length is not a shared bayonet.
Final Verdict
The Sony ALC-SH168 is the petal bayonet hood in the GM II box, at 103.9 mm by 42.0 mm and about 38.8 g, with B&H listing it at $73. The JJC LH-SH168 is the bayonet spare JJC names for the SEL2470GM2, and an Amazon listing is $19.99. The JJC LN-82W screws into the 82 mm filter ring and is 2.0 cm tall; JJC does not name the GM II on that page.