Best Lens Hood for Tamron 28-75mm f/2.8 Di III VXD G2
Side light at 28mm is why the G2 ships with a hood. Tamron’s specification lists that accessory as flower-shaped, and the HA063 page gives 86.6 mm across, 38 mm tall, and 22.6 g. The filter is 67 mm. The full-frame diagonal is 75°23′ at the wide end. On Sony E the lens is 540 g and 75.8 mm across. Unique Photo lists the hood at $21.90. Check the Tamron HA063 on Amazon.
Our Top Picks at a Glance
Reviewed September 2026 · Model A063 · HA063 · Φ67 mm filter
The flower hood Tamron names for the G2: 86.6 mm across, 38 mm tall, 22.6 g. Unique Photo lists $21.90.
Check Price at Amazon Read full review ↓JJC’s bayonet spare for the Sony E A063. A shop spec block prints 25.5 g. No US dollar was confirmed.
Check Price at Amazon Read full review ↓A 67 mm aluminum screw hood, 2.0 cm tall. JJC’s page does not name the A063.
Check Price at Amazon Read full review ↓This page contains affiliate links. A purchase through those links may earn Cameraegg a commission at no extra cost to you.
| Hood | How it mounts on the G2 | Published size | Buy |
|---|---|---|---|
| Tamron HA063 | Bayonet flower hood Tamron names for the A063 | 86.6 mm × 38 mm, 22.6 g | Check price |
| JJC LH-HA063 | Bayonet spare; JJC names the Sony E A063 | Ø3.35 × 1.46 in, 25.5 g | Check price |
| JJC LN-67W | 67 mm screw thread; A063 not named | Hood height 2.0 cm, aluminum | Check price |
| Tamron HA036 | Hood for the older 28-75mm RXD, model A036 | 86.8 mm × 36.5 mm, 18.3 g | Check price |
How We Picked
Three sourced facts: the hood model on Tamron’s HA063 page, the lens size on the A063 specification, and the mount each JJC hood actually uses.
- The G2 hood is model HA063. Tamron’s A063 specification lists a flower-shaped hood, a Φ67 mm filter, a maximum diameter of Φ75.8 mm, and a full-frame diagonal of 75°23’–32°11′. Sony E is 117.6 mm and 540 g. Nikon Z is 119.8 mm and 550 g. The HA063 page says the hood is for this G2 and prints a diameter of 86.6 mm, a height of 38 mm, and a weight of 22.6 g.
- Unique Photo lists the HA063 at $21.90 and says the hood usually ships in 7–14 days. That price is the shop’s listing, not an Amazon cart price. The same dollar appears on HA036 listings, so the price does not tell the two models apart.
- The JJC bayonet and the screw hood are different mounts. JJC’s LH-HA063 page says it replaces the HA063 for the Sony E A063 and that a Φ67 mm filter and the original cap still fit. A retailer spec block for that model prints Ø3.35 × 1.46 in and a net weight of 25.5 g. JJC’s LN-67W page is a 67 mm screw hood with a hood height of 2.0 cm, and that page does not name the A063.
Detailed Reviews
Tamron HA063 View on Amazon View on B&H
| Model | HA063, for the A063 |
|---|---|
| Mount | Flower-shaped hood, the standard accessory on the A063 specification |
| Size | Diameter 86.6 mm, height 38 mm |
| Weight | 22.6 g |
| Listed price | $21.90 at Unique Photo, usually ships in 7–14 days |
Why it fits the 28-75mm F/2.8 Di III VXD G2. Tamron’s specification calls the supplied accessory a flower-shaped hood, and the HA063 product page says that hood is for this G2. The only dimensions Tamron prints for the part are 86.6 mm across, 38 mm tall, and 22.6 g. The lens barrel’s maximum diameter is Φ75.8 mm, so the hood’s 86.6 mm diameter sits outside that barrel. Sony E and Nikon Z are both on the lens specification, with one flower hood listed for the model, not a separate hood per mount. Sony E is 540 g and 117.6 mm long. Nikon Z is 550 g and 119.8 mm long. Those lens figures do not include a second hood model.
Buy the HA063 when the hood from the box is missing and the bayonet still locks. Unique Photo’s $21.90 listing says the hood usually ships in 7–14 days. Skip a listing that says HA036. That model is the hood for the older 28-75mm F/2.8 Di III RXD, and Tamron prints it 1.5 mm shorter.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
JJC LH-HA063 View on Amazon View on B&H
| Model | LH-HA063 |
|---|---|
| Lens JJC names | 28-75mm F/2.8 Di III VXD G2, Sony E, model A063 |
| Size on a shop spec block | Ø3.35 × 1.46 in, net 25.5 g, ABS |
| Filter | JJC says a Φ67 mm filter and the original cap still fit |
| US price | Not confirmed. Fripers lists €13.75 |
Why it fits the Sony E G2. JJC’s LH-HA063 page names the 28-75mm F/2.8 Di III VXD G2 for Sony E, model A063, and says the hood replaces the HA063. It also says a Φ67 mm filter and the original cap still fit, and that the hood can be placed backward on the lens. JJC’s own page does not print millimetres. A retailer specification block for the same model prints Ø3.35 × 1.46 in and a net weight of 25.5 g, in ABS. Against Tamron’s 22.6 g, that shop figure is 2.9 g heavier. The inch line is the shop’s, not Tamron’s 86.6 × 38 mm.
No US dollar was confirmed for the LH-HA063. Fripers lists it at €13.75, which is a euro price and not a conversion of Unique Photo’s $21.90. Match the model LH-HA063 and the words Sony E on the tile. Skip it for a Nikon Z copy until the listing names that mount: JJC’s page does not.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
JJC LN-67W View on Amazon View on B&H
| Model | LN-67W |
|---|---|
| Mount | 67 mm screw thread (JJC prints 6.7 cm) |
| Height | 2.0 cm hood height; the same page prints a real size of 9.0 × 9.0 × 2.3 cm |
| Material | Aluminum |
| A063 on the JJC page | Not named |
Why it can go on this lens, and where it stops. The G2 filter is Φ67 mm. The LN-67W uses that thread. JJC prints a hood height of 2.0 cm and a real size of 9.0 × 9.0 × 2.3 cm, in aluminum. That page does not name the A063. No US dollar was confirmed, so this is not the priced saving against the $21.90 HA063. The euro price on the LH-HA063 is the other listing, and it is not a US cart price either.
Buy the LN-67W only when you want a hood screwed into the filter ring. Skip it when the bayonet still works. A screw hood occupies the thread a 67 mm filter would use.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
If You Need Something Else
The older 28-75mm F/2.8 Di III RXD, model A036, uses a different hood number. The diameters are close. The model printed on the hood is the difference.
Tamron HA036 View on Amazon View on B&H
| Model | HA036 |
|---|---|
| Lenses Tamron names | 28-75mm F/2.8 Di III RXD (A036), plus the 28-200mm, the 17-70mm, and the 18-300mm |
| Size | Diameter 86.8 mm, height 36.5 mm, 18.3 g |
| Listed price | $21.90 at Glazer’s Camera and at Unique Photo |
Tamron Europe’s HA036 page prints 86.8 mm, 36.5 mm, and 18.3 g, and the opening line names the first 28-75mm (A036), the 28-200mm, the 17-70mm, and the 18-300mm. The HA063 page names the G2. The HA063 is 1.4 mm narrower, 1.5 mm taller, and 4.3 g heavier on those two Tamron pages. Glazer’s and Unique Photo list the HA036 at $21.90, the same dollar Unique Photo prints for the HA063, so a price search will not separate them. Buy the HA036 for an A036. Leave it when the lens is the A063.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
Frequently Asked Questions
Why the G2 hood is HA063
Tamron’s A063 specification lists a flower-shaped hood among the standard accessories and does not print a model number there. The HA063 product page supplies the model and the size: 86.6 mm, 38 mm, 22.6 g, for this G2. A listing that says HA036 is the hood Tamron’s HA036 page ties to the older RXD and to three other lenses.
Whether Sony E and Nikon Z use different hoods
The A063 specification covers both mounts and lists one flower-shaped hood. Length and weight do change: 117.6 mm and 540 g on Sony E, 119.8 mm and 550 g on Nikon Z. JJC’s LH-HA063 page names the Sony E copy only. A Nikon Z spare should say HA063, or name the Nikon mount, before you treat the JJC page as the match.
What the 67 mm filter ring changes
The lens filter size is Φ67 mm. JJC says the LH-HA063 still allows a Φ67 mm filter and the original cap, because that hood uses the bayonet. The LN-67W screws into the filter ring, so the ring is no longer free for a filter.
What 22.6 g means next to the lens
Tamron’s HA063 weight is 22.6 g. The retailer figure for the LH-HA063 is 25.5 g net. On Sony E the lens weight is 540 g, and on Nikon Z it is 550 g. The hood is a separate part. It is not added inside those lens weights on the specification.
Why the same $21.90 can be the wrong hood
Unique Photo lists the HA063 at $21.90. Glazer’s Camera and Unique Photo also list the HA036 at $21.90. The HA036 is 36.5 mm tall and the HA063 is 38 mm tall. Read the model on the tile. The dollar does not identify it.
Final Verdict
The Tamron HA063 is the flower-shaped hood for the A063, at 86.6 mm across, 38 mm tall, and 22.6 g, with Unique Photo listing it at $21.90. The JJC LH-HA063 is the bayonet spare JJC names for the Sony E copy, at 25.5 g on a shop spec block, and no US dollar was confirmed. The JJC LN-67W screws into the Φ67 mm filter ring and is 2.0 cm tall; JJC does not name the A063 on that page.