Best Lens Hood for Tamron 17-70mm f/2.8 Di III-A VC RXD
Side light at 17mm is why the B070 ships with a hood. Tamron’s specification lists that accessory as flower-shaped, and the instruction manual names the bayonet hood HA036. Tamron Europe lists the HA036 at 86.8 mm across, 36.5 mm tall, and 18.3 g. US listings of that hood print $21.90. The wide-end diagonal is 80°37′ on Sony E, Nikon Z, and Fujifilm X. Check the Tamron HA036 on Amazon.
Our Top Picks at a Glance
Reviewed September 2026 · Model B070 · bayonet HA036 · Φ67 mm filter
The bayonet hood named in the B070 manual: 86.8 mm across, 36.5 mm tall, 18.3 g.
Check Price at Amazon Read full review ↓JJC lists this bayonet hood for the B070. It is 27 g, against the HA036’s 18.3 g, and one shop lists it at $12.99.
Check Price at Amazon Read full review ↓A 67 mm screw hood, 2.0 cm tall. JJC’s page for it does not name the B070.
Check Price at Amazon Read full review ↓This page contains affiliate links. A purchase through those links may earn Cameraegg a commission at no extra cost to you.
| Hood | How it mounts on the B070 | Published size | Buy |
|---|---|---|---|
| Tamron HA036 | Bayonet, the model in the B070 manual | 86.8 mm × 36.5 mm, 18.3 g | Check price |
| JJC LH-HA036 | Bayonet replacement; JJC names the B070 | 88.7 × 36.7 mm, 27 g | Check price |
| JJC LN-67W | 67 mm screw thread; B070 not named on that page | Height 2.0 cm, aluminum | Check price |
| JJC LS-67 | 67 mm screw thread for a standard zoom | 8.8 × 8.8 × 4.7 cm, 31 g | Check price |
How We Picked
Three sourced facts: the hood model in the B070 manual, the dimensions on Tamron’s HA036 page, and the mount each JJC hood actually uses.
- The included hood is model HA036. Tamron’s B070 specification lists a flower-shaped hood, a Φ67 mm filter, and a maximum diameter of Φ74.6 mm. The instruction manual names the hood HA036, describes a bayonet fit with alignment marks, and says the frame periphery can darken if the hood is not attached properly. The same manual says the hood can be stored by attaching it in reverse.
- Tamron Europe prints the HA036 size. That page lists a diameter of 86.8 mm, a height of 36.5 mm, and a weight of 18.3 g, and it names the 17-70mm F/2.8 Di III-A VC RXD, model B070. Glazer’s Camera and Unique Photo each list this hood at $21.90. Glazer’s listing prints manufacturer SKU RHAFA036.
- The two JJC hoods are not the same mount. JJC’s LH-HA036 page says it replaces the HA036 and names the B070; the printed size is Φ88.7 × 36.7 mm and 27 g, in ABS. JJC’s LN-67W page is a metal screw hood with a 6.7 cm lens diameter and a hood height of 2.0 cm, and that page does not name the B070. The match for the LN-67W is the filter size Tamron prints, not a bayonet claim.
Detailed Reviews
Tamron HA036 View on Amazon View on B&H
| Model | HA036 (Glazer’s listing also prints SKU RHAFA036) |
|---|---|
| Mount | Bayonet, with the alignment marks described in the B070 manual |
| Size | Diameter 86.8 mm, height 36.5 mm |
| Weight | 18.3 g |
| Listed price | $21.90 at Glazer’s Camera and at Unique Photo |
Why it fits the 17-70mm F/2.8 Di III-A VC RXD. Tamron’s specification calls the supplied accessory a flower-shaped hood, and the instruction manual gives that hood the model HA036. Tamron’s global accessory label for this lens reads “Lens Hood for A036/A071/B070/B061,” so the same HA036 is the hood Tamron groups with the 17-70mm. Europe’s HA036 page repeats the B070 and adds the only dimensions Tamron prints for the part: 86.8 mm across, 36.5 mm tall, 18.3 g. The lens barrel’s maximum diameter is Φ74.6 mm, so the hood’s 86.8 mm diameter sits outside that barrel. On Sony E the lens is 525 g; the hood Tamron lists is 18.3 g.
Buy the HA036 when the hood from the box is missing or cracked and the bayonet on the lens still locks. Glazer’s and Unique Photo both print $21.90; that figure is their listing, not a promise about the Amazon cart. Skip it when a shop title uses a different model number than HA036. The manual’s locking procedure is the check: align the hood attaching mark with the hood release mark, then rotate until the locking mark meets the release mark. The same page says the periphery of the picture may darken if the hood is not attached properly, including when it is only partly turned.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
JJC LH-HA036 View on Amazon View on B&H
| Model | LH-HA036 |
|---|---|
| Mount | Petal bayonet; JJC says it replaces the HA036 |
| Size | Φ88.7 × 36.7 mm |
| Weight | 27 g net, ABS |
| Listed price | $12.99 at Storetwo for this model |
Why it fits the 17-70mm F/2.8 Di III-A VC RXD. JJC’s LH-HA036 page names four Tamron lenses, and one of them is the 17-70mm F/2.8 Di III-A VC RXD, model B070. The other three on that page are the 28-75mm F/2.8 Di III RXD (A036), the 28-200mm F/2.8-5.6 Di III RXD (A071), and the 18-300mm F/3.5-6.3 Di III-A VC VXD (B061). That is the same set as Tamron’s global accessory label. JJC prints Φ88.7 × 36.7 mm and 27 g. Against Tamron’s HA036 figures, this hood is 1.9 mm wider, 0.2 mm taller, and 8.7 g heavier. JJC also states that a Φ67 mm filter and the Tamron lens cap still fit, and that the hood can be placed backwards on the lens for storage. The B070 manual already describes reverse storage for the supplied hood.
Storetwo lists an LH-HA036 at $12.99, which is $7.91 under the $21.90 HA036 price at Glazer’s and Unique Photo. That shop’s own compatible line names the 28-75mm A036; the B070 line is on JJC’s page, so match the model LH-HA036 on the tile before treating $12.99 as the B070 spare. Skip this hood if you want the 18.3 g part Tamron weighed, or if the listing does not say LH-HA036.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
JJC LN-67W View on Amazon View on B&H
| Model | LN-67W |
|---|---|
| Mount | 67 mm screw thread (JJC prints 6.7 cm) |
| Height | 2.0 cm hood height; the same page prints a real size of 9.0 × 9.0 × 2.3 cm |
| Material | Aluminum |
| B070 on the JJC page | Not named |
Why it can go on this lens, and where it stops. The B070’s filter size is Φ67 mm, and the manual draws the filter ring as a separate part from the hood alignment marks. The LN-67W uses that filter thread. JJC prints a hood height of 2.0 cm, which is shorter than the HA036’s 36.5 mm, and a real size of 9.0 × 9.0 × 2.3 cm. The material line is aluminum. No US dollar was confirmed for this model, so it is not the priced saving. The priced saving is the LH-HA036 at $12.99.
Buy the LN-67W only when you want a hood screwed into the filter ring and you are not replacing the bayonet part the manual names. Skip it when the bayonet still works: the HA036 and the LH-HA036 lock to those marks, and JJC’s LN-67W page never claims the B070. A screw hood also occupies the thread a 67 mm filter would use.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
If You Need Something Else
The LS-67 is another 67 mm screw hood from JJC, and its printed depth is the reason it stays off the short list. The B070’s wide end is 80°37′ on Sony E, Nikon Z, and Fujifilm X, and 77°0′ on Canon RF. A deeper hood on the filter thread is a different shape from the 36.5 mm flower hood Tamron ships.
JJC LS-67 View on Amazon View on B&H
| Model | LS-67 |
|---|---|
| Mount | Screw-in, for a standard zoom with a 67 mm thread |
| Size | 8.8 × 8.8 × 4.7 cm |
| Weight | 31 g net, ABS |
JJC’s LS-67 page describes a screw hood for a standard zoom and prints a real size of 8.8 × 8.8 × 4.7 cm, so the depth figure is 47 mm. The HA036 height on Tamron’s page is 36.5 mm, and the LN-67W hood height is 2.0 cm. The LS-67 is the tall one of the three. JJC does not name the B070 on the LS-67 page. Leave it when the lens will be used at 17 mm and a bayonet HA036 or LH-HA036 is available. It belongs here only if a 67 mm screw petal is the part you already decided to buy, and you have compared that 4.7 cm depth with the flower hood’s 36.5 mm height.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
Frequently Asked Questions
Why the B070 manual names HA036
Tamron’s specification lists the standard accessories as a flower-shaped hood, a front cap, and a rear cap. The instruction manual then prints the hood model: HA036. It is a bayonet hood. The global accessory label on the B070 page groups that hood with models A036, A071, B070, and B061. A listing that uses some other hood number is not the part those two Tamron pages name.
Whether Sony, Fujifilm, Nikon Z, and Canon RF copies use a different hood
Tamron’s specification covers all four mounts and lists one flower-shaped hood, not four hood models. Lens length and weight do change: 119.3 mm and 525 g on Sony E, 119.6 mm and 530 g on Fujifilm X, 121.3 mm and 540 g on Nikon Z, and 117.3 mm and 530 g on Canon RF. The wide-end diagonal is 80°37′ for Sony E, Nikon Z, and Fujifilm X, and 77°0′ for Canon RF. Those are lens figures. They are not a second hood model.
What the 67 mm filter ring changes
The manual’s parts list separates the filter ring from the hood attaching mark. A Φ67 mm filter threads into the ring. The HA036 and the LH-HA036 use the bayonet outside that ring. JJC says the LH-HA036 still allows a Φ67 mm filter and the Tamron cap. The LN-67W and the LS-67 screw into the filter ring itself, so that ring is no longer free for a filter.
Why the corners can go dark with the hood on
The B070 manual says the periphery of the photographed image may be darkened if the hood is not attached properly. The attachment it describes is mark to mark: hood attaching mark to hood release mark, then rotation until the locking mark meets the release mark. That sentence is about a mis-mounted bayonet hood. It is not a measurement of the LN-67W or the LS-67.
What 18.3 g means next to the lens
Tamron Europe’s HA036 weight is 18.3 g. JJC’s LH-HA036 is 27 g, and JJC’s LS-67 is 31 g net. On a Sony E copy of the lens, Tamron’s lens weight is 525 g with no hood in that figure. The hood is a separate 18.3 g part, not a change to the 525 g line.
Final Verdict
The Tamron HA036 is the flower-shaped bayonet hood in the B070 manual, at 86.8 mm across, 36.5 mm tall, and 18.3 g. The JJC LH-HA036 is the bayonet replacement JJC lists for this lens, at 88.7 by 36.7 mm and 27 g, with a shop price of $12.99 against the HA036’s $21.90. The JJC LN-67W screws into the Φ67 mm filter ring and is 2.0 cm tall; JJC does not name the B070 on that page.