Best USB Hub for NVIDIA SHIELD Android TV Pro
The SHIELD TV Pro has two USB 3.0 Type-A ports and a 40 W brick. An unpowered slim hub steals that budget and drops spinning drives. For most Plex libraries, the hub is the Anker 7-Port USB 3.0 with the 36 W adapter in the box.
Our Top Picks at a Glance
Reviewed August 2026 · Matched to SHIELD TV Pro 2019 two USB 3.0 Type-A ports
12 V / 3 A (36 W) brick in the box, seven 5 Gbps ports. The power budget a bus-powered hub does not have.
Check Price at Amazon Read full review ↓Four ports with per-port switches. Spin a Plex drive down without yanking the cable. 5 V / 2.5 A adapter included.
Check Price at Amazon Read full review ↓Seven ports and a 12 V / 2.5 A (30 W) adapter in the box. No switches. Often the cheap 7-port with a real brick.
Check Price at Amazon Read full review ↓Disclosure: This page contains affiliate links. As an Amazon Associate affiliate, we earn a small commission from qualifying purchases at no extra cost to you.
Comparison Table
| Product | Ports | Adapter in box | Shield job | Price | Buy |
|---|---|---|---|---|---|
| Anker A7505 | 7× USB 3.0 | 12 V / 3 A (36 W) | Default powered hub | ~$25–$35 | Check |
| Sabrent HB-UMP3 | 4× USB 3.0 + switches | 5 V / 2.5 A (12.5 W) | Per-port on/off | ~$16–$22 | Check |
| TP-Link UH700 | 7× USB 3.0 | 12 V / 2.5 A (30 W) | Cheap 7-port + brick | ~$20–$28 | Check |
| UGREEN 4-port + 5 V jack | 4× USB 3.0 | Often not included | Skip unless you have a 5 V brick | ~$12–$18 | Check |
| Slim unpowered 4-port | 4× USB 3.0 | None | Skip for HDDs | ~$10 | Check |
How We Picked These Hubs
- Host: NVIDIA still sells the 2019 SHIELD TV Pro: Tegra X1+, 16 GB (system uses part of it), two USB 3.0 Type-A ports, Gigabit Ethernet, HDMI 2.0b, 40 W adapter, 5–10 W typical draw, 250 g. Expandable storage is USB flash or hard drives. The tube SHIELD is not this page.
- Power: USB 3.0 SuperSpeed is 5 Gbps. A single bus-powered port is in the 900 mA class. A 2.5-inch spinning disk can sit there; two or three on an unpowered hub brown out. Anker’s A7505 ships a 12 V / 3 A (36 W) brick. Sabrent HB-UMP3 is 5 V / 2.5 A (12.5 W). TP-Link UH700 is 12 V / 2.5 A (30 W). Buy the listing that includes the wall wart.
- Android TV habits: Community setups that last put adopted/internal storage on a native Shield port (SSD, not a USB stick) and hang media disks off a powered hub on the other port. USB 3.0 ports can interfere with 2.4 GHz dongles; Anker documents that. Use a short USB 2 extension for Xbox/Logitech receivers if they drop. Do not plug a USB-C HDMI dock into this box — there is no USB-C host port.
Best USB Hub for NVIDIA SHIELD Android TV Pro: Detailed Reviews
Anker 7-Port USB 3.0 Data Hub (A7505) View on Amazon
| SKU / ASIN | A7505 · B00EYXZI4M |
|---|---|
| Ports | 7× USB-A 3.0 (5 Gbps); 7th port also BC 1.2 up to 2.1 A |
| Power | 12 V / 3 A wall adapter included |
| Cable | ~0.8 m USB 3.0 upstream |
Why it fits the SHIELD TV Pro. The constraint is current, not port count theater. This hub’s brick is 36 W, not the Shield’s USB budget. Plug the upstream cable into one Type-A port, plug the adapter into the wall, then hang portable HDDs and a keyboard dongle. The BC 1.2 port is a phone-charging — you are buying the data ports and the adapter. Leave the Shield’s second USB for an adopted SSD if you use that.
Skip this if you only need four ports and want a physical switch per drive — Sabrent. Skip any Anker 4-port ultra-slim listing that says charging is not supported and ships no brick.
- 36 W adapter included — matches HDD use
- Seven SuperSpeed ports on one Shield socket
- Needs a wall outlet behind the TV
- USB 3.0 can fuss with 2.4 GHz receivers next to the hub
Sabrent 4-Port USB 3.0 Hub (HB-UMP3) View on Amazon
| SKU / ASIN | HB-UMP3 · B00TPMEOYM |
|---|---|
| Ports | 4× USB-A 3.0 with independent switches |
| Power | 5 V / 2.5 A adapter included (12.5 W total) |
| Cable | ~68 cm / 2 ft upstream |
Why it fits the SHIELD TV Pro. Four ports is enough for a media disk, a backup disk, and a controller dongle. The switches let you electrically drop a drive without unplugging — useful when Android TV has already mounted it. This SKU is 5 V / 2.5 A. That is enough for 2.5-inch bus-powered disks in ones and twos. It is not a 3.5-inch desktop-drive farm.
Skip this if you need seven ports or more wattage — Anker or UH700. Skip Sabrent 16-port 90 W docking stations; that is a desk, not a streamer.
- Per-port power without crawling behind the TV
- Adapter in the box, unlike many “powered” UGREEN SKUs
- 12.5 W shared across four ports
- Only four SuperSpeed sockets
TP-Link UH700 7-Port USB 3.0 Hub View on Amazon
| SKU / ASIN | UH700 · B00P115F4E |
|---|---|
| Ports | 7× USB-A 3.0 (5 Gbps) |
| Power | 12 V / 2.5 A adapter included |
| Cable | 1 m USB 3.0 upstream |
Why it fits the SHIELD TV Pro. Same job as the Anker 7-port: a real wall adapter and seven SuperSpeed sockets. 30 W vs Anker’s 36 W is close enough for 2.5-inch disks. The 1 m cable helps when the Shield sits in a cabinet. No per-port switches. TP-Link lists up to 5 V / 1.5 A on a charging-oriented port — still buy this for data, not as a phone charger.
Skip this if you want the Anker BC 1.2 extra or Sabrent’s switches. Skip Amazon Basics 4-port listings that do not show a brick in the photos.
- 30 W brick included at a lower street price than Anker
- Seven ports, 1 m cable
- No individual port switches
- Older plastic shell, not a USB4 dock
If You Need Something Else
These two are not cheaper Overall hubs. One is the “powered” listing that often ships without a brick. The other is the unpowered slim hub that browns out HDDs.
4-port USB 3.0 ultra-slim (no adapter) View on Amazon
| Type | Bus-powered USB 3.0 hub |
|---|---|
| Typical use | Flash drives, keyboard, mouse on a laptop |
| On a Shield | Dongles only — not spinning HDDs |
These are fine for a USB keyboard and a thumb drive. They are how Plex libraries go missing. Anker’s own 4-port slim line even marks “charging not supported.” Do not use one as adopted storage or as the only path to a 2.5-inch disk.
Skip this for any Shield storage job.
Frequently Asked Questions
Does the tube SHIELD use the same hub?
No. This page is the Pro with two Type-A USB 3.0 ports. The tube model is a different I/O set. Check the ports on the unit in the cabinet before you order a seven-port brick.
Should adopted storage sit on the hub?
Prefer a USB SSD on a native Shield port. Put media disks on the powered hub. A brown-out on adopted storage is an app-and-OS problem, not just a playback glitch. NVIDIA no longer treats USB sticks as a good internal-storage substitute.
Will a USB 3.0 hub slow a USB 3 SSD?
All devices on one hub share one 5 Gbps SuperSpeed pipe back to the Shield. One sequential 4K file is fine. Several disks copying at once will share that pipe. That is USB 3.0 math, not a Shield defect.
Can I use a USB-C hub or Ethernet dock?
The Pro has no USB-C host port. HDMI and Gigabit Ethernet are already on the box. A MacBook USB-C dock does not plug in. An Ethernet-plus-USB combo hub is redundant networking.
Final Verdict
For most SHIELD TV Pro builds, buy the Anker A7505. If you want to kill idle disks from the front, that is the Sabrent HB-UMP3. Need seven ports cheaper? UH700. Skip unpowered slims, USB-C laptop docks, and “powered” hubs that do not include a wall adapter.