Best USB-C Charger for Apple HomeView (Wall Mounted)
Wall-mounted HomeView ships without a power adapter. Apple’s support note asks for a USB-C adapter of at least 20W that supports 9V at 2.22A, or the screen can show Not Enough Power. The plug-in mount accepts 20W up to 60W. One USB-C port that also lists 15V at 2A covers that floor and the tabletop model. Buy the Anker Nano Charger (30W). Check Anker Nano Charger (30W) on Amazon.
Our Top Picks at a Glance
Reviewed October 2026 · Wall model: 20W minimum, 9V at 2.22A · Tabletop: 30W and 15V at 2A · Plug-in mount window: 20W to 60W
One USB-C port lists 9V at 3A, above the wall floor, and 15V at 2A, which is the tabletop line. Anker lists $15.99.
Check Price at Amazon Read full review ↓Prints 9V at 2.22A, the exact wall floor, at $11.99. That is $4.00 under the 30W brick. It does not list 15V at 2A.
Check Price at Amazon Read full review ↓Two USB-C ports. One port lists 9V at 3A and 15V at 3A, up to 45W. Anker lists $25.99, which is $10.00 above the 30W charger.
Check Price at Amazon Read full review ↓This page contains affiliate links. A purchase through those links may earn Cameraegg a commission at no extra cost to you.
| Charger | Port that feeds HomeView | Printed rail | Buy |
|---|---|---|---|
| Anker Nano Charger (30W) | 1 USB-C | 9V/3A and 15V/2A, 30W max, $15.99 | Check price |
| Anker Nano Charger (20W) | 1 USB-C | 9V/2.22A, 20W max, $11.99 | Check price |
| Anker 523 Charger (Nano 3, 47W) | 2 USB-C | One port 45W max; both ports 27W+20W, $25.99 | Check price |
How We Picked
Three sourced facts: Apple’s wall-adapter line, the plug-in mount’s wattage window, and a single USB-C port that prints both rails.
- The wall model has a voltage floor, not just a wattage. Apple Support, October 13, 2026: HomeView (Wall Mounted) uses a USB-C cable and a USB-C power adapter, both sold separately, of at least 20W that supports 9V at 2.22A or higher. The tabletop HomeView uses a USB-C cable and a USB-C power adapter of at least 30W that supports 15V at 2A or higher. If the requirement is missed, the screen shows a lightning bolt with a yellow exclamation mark and the words Not Enough Power.
- The plug-in mount accepts 20W up to 60W. Its Apple Store page says the mount supplies USB-C power in that range and still needs a power adapter of at least 20W, sold separately. A 2-meter cable is part of that mount. A hardwired mount feeds the display from the wall and does not use one of these bricks.
- One port should carry the whole rail. The 30W charger prints 9V at 3A, which is above 2.22A, and 15V at 2A, on its only USB-C port. The 20W charger prints 9V at 2.22A and stops there. Extra watts above 30W are not a HomeView feature. The display is wired power, not a battery that fills faster.
Detailed Reviews
Anker Nano Charger (30W) View on Amazon
| Model | A2147 |
|---|---|
| Ports | 1 USB-C |
| Output | 5V/3A, 9V/3A, 15V/2A, 20V/1.5A (30W max) |
| PPS, printed | 3.3–11V/3A and 3.3–16V/2A, 30W max |
| Size | 1.12 × 1.12 × 1.39 in |
| Anker price | $15.99 |
Why it fits the wall-mounted HomeView. Apple’s wall line is 20W and 9V at 2.22A or higher. This charger’s only port lists 9V at 3A, so the current sits above that floor, and the 30W cap sits inside the plug-in mount’s 20W-to-60W window. The same port lists 15V at 2A, which is the tabletop model’s line of at least 30W and 15V at 2A. Anker lists it at $15.99, four dollars above the 20W charger.
PPS is printed on the page. Apple’s HomeView note does not ask for PPS, so that line is not the reason to buy it. A higher wattage does not make the display brighter. Buy this when the outlet powers a HomeView and nothing else needs the same brick. The 20W charger is the one that only has to meet the wall floor.
Anker Nano Charger (20W) View on Amazon
| Ports | 1 USB-C |
|---|---|
| Output | 5V/3A or 9V/2.22A |
| Input | 100–240V, 0.6A, 50–60Hz |
| Size | 1.16 × 1.16 × 1.18 in (29.5 × 29.5 × 30 mm) |
| Weight | 1.1 oz |
| Prongs | Fixed. Anker’s page says this charger is not foldable |
| Anker price | $11.99 |
Why it fits the wall-mounted HomeView. The printed output is 5V at 3A or 9V at 2.22A. That 9V figure is the same current Apple names for the wall model. Anker lists $11.99, which is $4.00 under the 30W charger. The page also says a USB-C to USB-C cable is sold separately. On the plug-in mount, that cable is the 2-meter lead in the mount box.
The output table stops at 9V. The tabletop model asks for 15V at 2A and at least 30W, and this charger does not list that rail. Use it for the wall unit. Use the 30W charger if the same brick also has to run the tabletop model.
Anker 523 Charger (Nano 3, 47W) View on Amazon
| Ports | 2 USB-C |
|---|---|
| One port | 5V/3A, 9V/3A, 11V/4A, 15V/3A, 20V/2.25A (45W max) |
| Both ports | 27W + 20W (47W max) |
| Listed capacity | 47W |
| Size | 1.36 × 1.36 × 2.05 in |
| Anker price | $25.99 |
Why it fits the wall-mounted HomeView. With one port in use, Anker lists 9V at 3A and 15V at 3A, up to 45W. That single-port table clears the wall floor and the tabletop’s 15V at 2A line. The page’s total capacity is 47W, and the one-port ceiling is 45W. Those two numbers stay separate. Anker lists $25.99, which is $10.00 above the 30W charger. The extra watts are not a brighter HomeView. The plug-in mount’s own ceiling is 60W.
With both ports in use, the page lists 27W plus 20W and does not print a 9V current for that split. Plug the wall unit into one port by itself when you need the printed 9V at 3A rail. This is the shared-outlet charger, not the cheaper one.
If You Need Something Else
A hardwired wall mount feeds HomeView from household AC and does not use these adapters. Apple’s store page for that mount says it delivers up to 30W over USB-C. The Ethernet mount delivers 20W over USB-C from a network cable, and Apple Newsroom lists it for early 2027. Those two paths are in the wall-mount guide.
The tabletop HomeView ships with its own cable and adapter. Apple’s support note for that model is at least 30W and 15V at 2A. The 30W and 47W chargers above print that 15V rail on a single port. The 20W charger’s table stops at 9V.
Frequently Asked Questions
What Apple prints for a wall-mounted HomeView adapter
Apple Support, October 13, 2026: a USB-C cable and a USB-C power adapter, both sold separately, of at least 20W that supports 9V at 2.22A or higher. The plug-in mount’s own page sets the window at 20W up to 60W and still asks for an adapter of at least 20W.
What the Not Enough Power message means
Apple says the screen shows a lightning bolt with a yellow exclamation mark when the power requirement is missed. The same page says to try another USB-C cable and another compatible adapter. A wall unit can also be lifted off its mount and plugged straight into the adapter as a check.
Whether more than 30W changes the display
Apple does not list a brighter screen or a faster HomeView above the 20W and 9V line. The unit is wired power. The 47W charger’s extra watts are there for a second device, or for the 15V rail when one port is used alone.
What the tabletop model asks for
At least 30W, and 15V at 2A or higher, on a USB-C adapter. The tabletop box includes a cable and an adapter. The wall box does not. A 20W charger that stops at 9V meets the wall line and does not list the tabletop rail.
Where the USB-C cable comes from
Apple’s wall note says the cable is sold separately. The plug-in mount’s Apple Store page includes a 2-meter cable and still leaves the adapter as a separate purchase. Anker’s 20W page also says the cable is sold separately.
Final Verdict
The wall-mounted HomeView needs a USB-C adapter of at least 20W that supports 9V at 2.22A. The Anker Nano Charger (30W) prints 9V at 3A and 15V at 2A on one port, inside the plug-in mount’s 20W-to-60W window, at $15.99. The Anker Nano Charger (20W) prints the 9V at 2.22A floor at $11.99 and does not list 15V. The Anker 523 Charger (Nano 3, 47W) prints 9V at 3A only while one of its two ports is in use, at $25.99.