Best MicroSD Card for DJI Osmo 360 II

Who should buy what

• A balanced starting capacity for routine shooting: Lexar Professional SILVER PLUS 256GB microSDXC.
• More capacity between offloads: Kingston Canvas Go! Plus 512GB microSDXC.
• Staying with SILVER PLUS while carrying more storage: Lexar Professional SILVER PLUS 512GB microSDXC.

DJI Osmo 360 II supports microSD cards up to 1TB. DJI’s recommended options include Lexar SILVER PLUS and Kingston Canvas Go! Plus U3 A2 V30 cards in capacities from 64GB to 1TB. The selections below stay within those published families and capacities. Do not buy a 2TB card simply because that capacity exists in the same family.

The camera also has 105GB of available built-in storage. Internal storage and the removable card are separate destinations, not an automatic two-copy backup. Check the active storage destination before recording and include both locations when offloading.

Keep the original camera files until reframing and export are complete. A flat video exported for social media is a different deliverable from the original spherical capture. Your computer or phone also needs working space for originals, caches and exports. Record a test in the intended 360° or single-lens mode rather than assuming one short low-demand clip validates every setting.

Start with a realistic card size

For many mixed shooting days, 256GB is a useful starting point: it leaves room for multiple takes while encouraging a regular offload routine. Move to 512GB when you expect longer sessions or fewer opportunities to copy files. Two smaller cards can make rotation easier, but they are not a backup of each other unless you actually duplicate the footage.

Estimate time from bitrate

For planning, decimal capacity in GB multiplied by 8000 and divided by bitrate in Mbps gives approximate recording seconds. A 256GB card at a constant 200Mbps would hold roughly 171 minutes before allowing for formatting, audio, metadata or other overhead. This is arithmetic, not a measured runtime. Variable bitrate and changes of recording mode alter the result, and battery or temperature limits can stop a take first.

Separate sustained writing from transfer speed

The largest MB/s number on a card listing is often a peak read figure. It does not describe the guaranteed sustained write class or the camera’s own transfer limit. A fast reader can shorten an offload when the card and computer support it, but it cannot make an unsuitable card meet a camera recording requirement.

Keep the purchase specific

Match the full family name, capacity and speed markings. Different generations and formats can share similar packaging. Buy from a seller with a clear return policy, check the received label and retain the packaging until you have tested the card. Avoid treating a very low price or a large printed capacity as proof of authenticity.

1. Copy any existing files before formatting.
2. Format the card in the camera using its normal procedure.
3. Record a representative clip in the most demanding mode you intend to use.
4. Play it back and verify a computer transfer before an important job.
5. Make two verified copies before erasing the original footage.

Do not remove the card or interrupt power while the camera is writing. Keep a spare tested card in a separate protective holder. If repeated recording warnings appear, investigate the exact card, selected mode, firmware and operating conditions rather than assuming another quick format repairs the problem. Retire questionable media from important work.