{"id":63965,"date":"2026-09-22T13:26:48","date_gmt":"2026-09-22T13:26:48","guid":{"rendered":"https:\/\/www.cameraegg.org\/test\/?p=63965"},"modified":"2026-09-25T14:18:45","modified_gmt":"2026-09-25T14:18:45","slug":"best-speakers-for-sony-strdh190","status":"publish","type":"post","link":"https:\/\/www.cameraegg.org\/test\/best-speakers-for-sony-strdh190\/","title":{"rendered":"Best Speakers for Sony STRDH190"},"content":{"rendered":"<div class=\"gagen-article gagen-v2\">\n<div class=\"article-intro\">\n<p>Powered speakers leave the STR-DH190\u2019s speaker terminals unused. This receiver wants a passive pair from 6 to 16 ohms, and its full-band rating is 90 W per channel into 8 ohms. The Klipsch RP-600M II pairs 94.5 dB sensitivity with an 8-ohm-compatible rating and 100 W continuous power handling. <a href=\"https:\/\/www.amazon.com\/s?k=Klipsch+RP-600M+II&#038;tag=e6890-20&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">Check Klipsch RP-600M II on Amazon<\/a>.<\/p>\n<\/div>\n\n<div class=\"quick-picks-box\">\n  <div class=\"qp-header\">\n    <h2>Our Top Picks at a Glance<\/h2>\n    <p class=\"qp-sub\">Reviewed September 2026 \u00b7 6\u201316 ohms \u00b7 100 W into 8 ohms \u00b7 passive pairs only<\/p>\n  <\/div>\n  <div class=\"qp-cards\">\n    <div class=\"qp-card qp-card--gold\">\n      <span class=\"qp-num\">01<\/span>\n      <span class=\"qp-badge\">\ud83c\udfc6 Best Overall<\/span>\n      <strong class=\"qp-name\">Klipsch RP-600M II<\/strong>\n      <div class=\"qp-rating\">\u2605\u2605\u2605\u2605\u2605 <span class=\"qp-score\">4.8 \/ 5.0<\/span> <span class=\"qp-reviews\">\u00b7 2026 pick<\/span><\/div>\n      <p class=\"qp-why\">94.5 dB sensitivity and 8-ohm compatible, with 100 W continuous handling that lines up with this receiver\u2019s 8-ohm rating. Leave SP IMP. on 8 OHM.<\/p>\n      <a href=\"https:\/\/www.amazon.com\/s?k=Klipsch+RP-600M+II&#038;tag=e6890-20&#038;linkCode=osi\" class=\"qp-btn\" target=\"_blank\" rel=\"nofollow sponsored noopener\">Check Price at Amazon<\/a>\n      <a href=\"#best-overall\" class=\"qp-jump\">Read full review \u2193<\/a>\n    <\/div>\n    <div class=\"qp-card qp-card--green\">\n      <span class=\"qp-num\">02<\/span>\n      <span class=\"qp-badge\">\ud83d\udc8e Best Value<\/span>\n      <strong class=\"qp-name\">Sony SS-CS5M2<\/strong>\n      <div class=\"qp-rating\">\u2605\u2605\u2605\u2605\u2606 <span class=\"qp-score\">4.5 \/ 5.0<\/span> <span class=\"qp-reviews\">\u00b7 2026 pick<\/span><\/div>\n      <p class=\"qp-why\">Sony\u2019s current 3-way bookshelf, rated 6 ohms and 100 W. That sits on the receiver\u2019s impedance floor, so set SP IMP. to 6 OHM.<\/p>\n      <a href=\"https:\/\/www.amazon.com\/s?k=Sony+SS-CS5M2&#038;tag=e6890-20&#038;linkCode=osi\" class=\"qp-btn\" target=\"_blank\" rel=\"nofollow sponsored noopener\">Check Price at Amazon<\/a>\n      <a href=\"#best-value\" class=\"qp-jump\">Read full review \u2193<\/a>\n    <\/div>\n    <div class=\"qp-card qp-card--blue\">\n      <span class=\"qp-num\">03<\/span>\n      <span class=\"qp-badge\">\ud83d\udcb0 Budget Pick<\/span>\n      <strong class=\"qp-name\">JBL Stage 250B<\/strong>\n      <div class=\"qp-rating\">\u2605\u2605\u2605\u2605\u2606 <span class=\"qp-score\">4.3 \/ 5.0<\/span> <span class=\"qp-reviews\">\u00b7 2026 pick<\/span><\/div>\n      <p class=\"qp-why\">Nominal 6 ohms and a 20\u2013150 W amplifier window. The receiver\u2019s 90 W full-band rating sits inside that range. Set SP IMP. to 6 OHM.<\/p>\n      <a href=\"https:\/\/www.amazon.com\/s?k=JBL+Stage+250B&#038;tag=e6890-20&#038;linkCode=osi\" class=\"qp-btn\" target=\"_blank\" rel=\"nofollow sponsored noopener\">Check Price at Amazon<\/a>\n      <a href=\"#budget-pick\" class=\"qp-jump\">Read full review \u2193<\/a>\n    <\/div>\n  <\/div>\n<\/div>\n\n<div class=\"affiliate-disclosure\"><p><em>This page contains affiliate links. A purchase through those links may earn Cameraegg a commission at no extra cost to you.<\/em><\/p><\/div>\n\n<div class=\"info-module buying-guide\" id=\"who-should-buy\">\n  <h3>Who should buy what<\/h3>\n  <ul>\n    <li><strong>Loudest result from 90\u2013100 W:<\/strong> <a href=\"#best-overall\">Klipsch RP-600M II<\/a>. 94.5 dB sensitivity, SP IMP. stays on 8 OHM.<\/li>\n    <li><strong>A Sony pair matched to the 100 W \/ 6 ohm limit:<\/strong> <a href=\"#best-value\">Sony SS-CS5M2<\/a>. Set SP IMP. to 6 OHM.<\/li>\n    <li><strong>A smaller 2-way whose amp range starts at 20 W:<\/strong> <a href=\"#budget-pick\">JBL Stage 250B<\/a>. Also 6 ohms, same SP IMP. setting.<\/li>\n  <\/ul>\n<\/div>\n\n<div class=\"table-container\">\n  <table class=\"comparison-table\">\n    <thead><tr><th>Speaker<\/th><th>On the STR-DH190<\/th><th>Sensitivity and power<\/th><th>Buy<\/th><\/tr><\/thead>\n    <tbody>\n      <tr class=\"highlight-row\"><td><strong>Klipsch RP-600M II<\/strong><\/td><td>8-ohm compatible; SP IMP. 8 OHM<\/td><td>94.5 dB; 100 W continuous<\/td><td><a href=\"https:\/\/www.amazon.com\/s?k=Klipsch+RP-600M+II&#038;tag=e6890-20&#038;linkCode=osi\" class=\"table-price-btn\" target=\"_blank\" rel=\"nofollow sponsored noopener\">Check price<\/a><\/td><\/tr>\n      <tr><td><strong>Sony SS-CS5M2<\/strong><\/td><td>6 ohms rated; SP IMP. 6 OHM<\/td><td>100 W maximum input<\/td><td><a href=\"https:\/\/www.amazon.com\/s?k=Sony+SS-CS5M2&#038;tag=e6890-20&#038;linkCode=osi\" class=\"table-price-btn\" target=\"_blank\" rel=\"nofollow sponsored noopener\">Check price<\/a><\/td><\/tr>\n      <tr><td><strong>JBL Stage 250B<\/strong><\/td><td>6 ohms nominal; SP IMP. 6 OHM<\/td><td>86 dB; 20\u2013150 W amplifier<\/td><td><a href=\"https:\/\/www.amazon.com\/s?k=JBL+Stage+250B&#038;tag=e6890-20&#038;linkCode=osi\" class=\"table-price-btn\" target=\"_blank\" rel=\"nofollow sponsored noopener\">Check price<\/a><\/td><\/tr>\n    <\/tbody>\n  <\/table>\n<\/div>\n\n<h2>How We Picked<\/h2>\n<div class=\"how-we-picked\">\n<p>Three sourced facts: the receiver\u2019s impedance and wattage, the speaker that uses that wattage most efficiently, and two 6 ohm pairs that still sit inside Sony\u2019s range.<\/p>\n<ul>\n  <li><strong>6\u201316 ohms, and 12 ohms when A and B play together.<\/strong> Sony STR-DH190 specifications (USA): 2 channels, speaker impedance 6\u201316 ohms, 100 W + 100 W (8 ohms, 1 kHz, THD 1%). The owner\u2019s manual adds 90 W + 90 W (8 ohms, 20 Hz\u201320 kHz, THD 0.09%), SP IMP. \u201c8 OHM\u201d for speakers of 8 ohms or higher and \u201c6 OHM\u201d when they are lower than 8 ohms, and 12 ohms or higher when speakers are connected to both A and B.<\/li>\n  <li><strong>94.5 dB is the efficient match for 90 W.<\/strong> Klipsch RP-600M II spec sheet: sensitivity 94.5 dB at 2.83 V \/ 1 m, power handling 100 W continuous and 400 W peak, nominal impedance 8 ohms compatible, frequency response 44 Hz\u201325 kHz \u00b13 dB. Klipsch\u2019s speaker manual says to leave the binding-post jumper in place for a single-wire connection.<\/li>\n  <li><strong>6 ohms is allowed, and it changes the menu.<\/strong> Sony SS-CS5M2 specifications: rated impedance 6 ohms, maximum input power 100 W, 3-way, frequency range 53 Hz\u201350 kHz, screw terminals. JBL Stage 250B spec sheet (2024): nominal impedance 6 ohms, sensitivity 86 dB at 2.83 V \/ 1 m, recommended amplifier power 20\u2013150 W, frequency response 50 Hz\u201325 kHz \u00b16 dB.<\/li>\n<\/ul>\n<\/div>\n\n<h2>Detailed Reviews<\/h2>\n\n<div class=\"top-recommendation\" id=\"best-overall\" data-badge=\"best-overall\">\n  <div class=\"top-badge badge-best-overall\">\ud83c\udfc6 Best Overall<\/div>\n  <h3>Klipsch RP-600M II <a href=\"https:\/\/www.amazon.com\/s?k=Klipsch+RP-600M+II&#038;tag=e6890-20&#038;linkCode=osi\" target=\"_blank\" class=\"title-amazon-btn\" rel=\"nofollow noopener\">View on Amazon<\/a><\/h3>\n  <div class=\"product-highlights\">\n    <div class=\"highlight-item\"><span class=\"highlight-label\">Best For:<\/span> Getting the most volume from 90\u2013100 W<\/div>\n    <div class=\"highlight-item\"><span class=\"highlight-label\">Key Feature:<\/span> 94.5 dB \u00b7 8-ohm compatible \u00b7 100 W continuous<\/div>\n    <div class=\"highlight-item\"><span class=\"highlight-label\">Rating:<\/span> <span class=\"star-rating\">4.8 \/ 5.0 \u2605\u2605\u2605\u2605\u2605<\/span><\/div>\n  <\/div>\n  <table class=\"spec-table\">\n    <tr><th>Sensitivity<\/th><td>94.5 dB at 2.83 V \/ 1 m<\/td><\/tr>\n    <tr><th>Nominal impedance<\/th><td>8 ohms compatible<\/td><\/tr>\n    <tr><th>Power handling<\/th><td>100 W continuous \/ 400 W peak<\/td><\/tr>\n    <tr><th>Frequency response<\/th><td>44 Hz\u201325 kHz \u00b13 dB<\/td><\/tr>\n    <tr><th>Drivers<\/th><td>6.5 in cerametallic woofer, 1 in titanium tweeter<\/td><\/tr>\n    <tr><th>Inputs<\/th><td>Dual binding posts; leave the jumper in<\/td><\/tr>\n  <\/table>\n  <p><strong>Why it fits the STR-DH190.<\/strong> The receiver\u2019s clean full-band figure is 90 W per channel into 8 ohms, and the 1 kHz figure is 100 W at 1% THD. This speaker\u2019s continuous rating is 100 W, and Klipsch lists it as 8-ohm compatible, which is the case Sony\u2019s menu calls \u201c8 OHM.\u201d At 94.5 dB it is 8.5 dB more sensitive than the JBL\u2019s 86 dB, so the same wattage reaches a higher level before the receiver runs out of power. Connect one cable to each speaker and leave the link between the two binding posts in place. The STR-DH190 has one amplifier channel per speaker, so the bi-wire posts stay strapped.<\/p>\n  <p>Buy this pair for music and movies in one room on speaker A or speaker B. Leave it when the cabinet has to be smaller than a 6.5 inch bookshelf, or when a second pair must play at the same time. These are not 12 ohm speakers.<\/p>\n  <p class=\"purchase-link\"><span class=\"amazon-region-btn\">Check Price on <a href=\"https:\/\/www.amazon.com\/s?k=Klipsch+RP-600M+II&#038;tag=e6890-20&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">Amazon US<\/a>, <a href=\"https:\/\/www.amazon.co.uk\/s?k=Klipsch+RP-600M+II&#038;tag=pctest07-21&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">UK<\/a>, <a href=\"https:\/\/www.amazon.ca\/s?k=Klipsch+RP-600M+II&#038;tag=pctestt-20&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">CA<\/a>, <a href=\"https:\/\/www.amazon.de\/s?k=Klipsch+RP-600M+II&#038;tag=67990-21&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">DE<\/a> \u2192<\/span><\/p>\n<\/div>\n\n<div class=\"top-recommendation\" id=\"best-value\" data-badge=\"best-value\">\n  <div class=\"top-badge badge-best-value\">\ud83d\udc8e Best Value<\/div>\n  <h3>Sony SS-CS5M2 <a href=\"https:\/\/www.amazon.com\/s?k=Sony+SS-CS5M2&#038;tag=e6890-20&#038;linkCode=osi\" target=\"_blank\" class=\"title-amazon-btn\" rel=\"nofollow noopener\">View on Amazon<\/a><\/h3>\n  <div class=\"product-highlights\">\n    <div class=\"highlight-item\"><span class=\"highlight-label\">Best For:<\/span> A Sony 6 ohm pair on this Sony receiver<\/div>\n    <div class=\"highlight-item\"><span class=\"highlight-label\">Key Feature:<\/span> 6 ohms \u00b7 100 W maximum \u00b7 screw terminals<\/div>\n    <div class=\"highlight-item\"><span class=\"highlight-label\">Rating:<\/span> <span class=\"star-rating\">4.5 \/ 5.0 \u2605\u2605\u2605\u2605\u2606<\/span><\/div>\n  <\/div>\n  <table class=\"spec-table\">\n    <tr><th>Rated impedance<\/th><td>6 ohms<\/td><\/tr>\n    <tr><th>Maximum input power<\/th><td>100 W<\/td><\/tr>\n    <tr><th>System<\/th><td>3-way, 3-driver bookshelf, sold as a pair<\/td><\/tr>\n    <tr><th>Drivers<\/th><td>5.12 in woofer, 0.98 in tweeter, 0.75 in super tweeter<\/td><\/tr>\n    <tr><th>Frequency range<\/th><td>53 Hz\u201350 kHz<\/td><\/tr>\n    <tr><th>Terminals<\/th><td>Screw type<\/td><\/tr>\n  <\/table>\n  <p><strong>Why it fits the STR-DH190.<\/strong> Sony rates the SS-CS5M2 at 6 ohms and 100 W maximum input. Six ohms is the bottom of the receiver\u2019s 6\u201316 ohm range, and 100 W matches the receiver\u2019s 100 W (8 ohms, 1 kHz, 1% THD) figure. The owner\u2019s manual says to set SP IMP. to \u201c6 OHM\u201d when the speakers are lower than 8 ohms. Screw terminals take the same bare speaker wire the receiver\u2019s A\/B posts use. The published frequency range starts at 53 Hz, so this pair gives up the Klipsch\u2019s 44 Hz \u00b13 dB extension.<\/p>\n  <p>Buy it when the pair should be Sony\u2019s current CS bookshelf and the menu can be switched to 6 OHM. Leave it when the goal is the higher sensitivity of the RP-600M II.<\/p>\n  <p class=\"purchase-link\"><span class=\"amazon-region-btn\">Check Price on <a href=\"https:\/\/www.amazon.com\/s?k=Sony+SS-CS5M2&#038;tag=e6890-20&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">Amazon US<\/a>, <a href=\"https:\/\/www.amazon.co.uk\/s?k=Sony+SS-CS5M2&#038;tag=pctest07-21&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">UK<\/a>, <a href=\"https:\/\/www.amazon.ca\/s?k=Sony+SS-CS5M2&#038;tag=pctestt-20&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">CA<\/a>, <a href=\"https:\/\/www.amazon.de\/s?k=Sony+SS-CS5M2&#038;tag=67990-21&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">DE<\/a> \u2192<\/span><\/p>\n<\/div>\n\n<div class=\"top-recommendation\" id=\"budget-pick\" data-badge=\"budget-pick\">\n  <div class=\"top-badge badge-budget\">\ud83d\udcb0 Budget Pick<\/div>\n  <h3>JBL Stage 250B <a href=\"https:\/\/www.amazon.com\/s?k=JBL+Stage+250B&#038;tag=e6890-20&#038;linkCode=osi\" target=\"_blank\" class=\"title-amazon-btn\" rel=\"nofollow noopener\">View on Amazon<\/a><\/h3>\n  <div class=\"product-highlights\">\n    <div class=\"highlight-item\"><span class=\"highlight-label\">Best For:<\/span> A 6 ohm 2-way the 90 W rating can cover<\/div>\n    <div class=\"highlight-item\"><span class=\"highlight-label\">Key Feature:<\/span> 6 ohms nominal \u00b7 86 dB \u00b7 20\u2013150 W<\/div>\n    <div class=\"highlight-item\"><span class=\"highlight-label\">Rating:<\/span> <span class=\"star-rating\">4.3 \/ 5.0 \u2605\u2605\u2605\u2605\u2606<\/span><\/div>\n  <\/div>\n  <table class=\"spec-table\">\n    <tr><th>Nominal impedance<\/th><td>6 ohms<\/td><\/tr>\n    <tr><th>Sensitivity<\/th><td>86 dB at 2.83 V \/ 1 m<\/td><\/tr>\n    <tr><th>Recommended amplifier<\/th><td>20\u2013150 W<\/td><\/tr>\n    <tr><th>Frequency response<\/th><td>50 Hz\u201325 kHz \u00b16 dB<\/td><\/tr>\n    <tr><th>Drivers<\/th><td>5.25 in polycellulose woofer, 1 in aluminum tweeter<\/td><\/tr>\n    <tr><th>Inputs<\/th><td>5-way binding posts<\/td><\/tr>\n  <\/table>\n  <p><strong>Why it fits the STR-DH190.<\/strong> JBL publishes a nominal impedance of 6 ohms, so this pair is inside the receiver\u2019s range and uses the same \u201c6 OHM\u201d menu setting as the SS-CS5M2. Recommended amplifier power is 20\u2013150 W. The receiver\u2019s 90 W full-band rating and 100 W 1 kHz rating both fall in that window. Sensitivity is 86 dB, which is the number to weigh against the Klipsch\u2019s 94.5 dB when the room is large. Binding posts accept the receiver\u2019s speaker cable directly.<\/p>\n  <p>Buy it for a compact 2-way on speaker A or B. Leave it when the room needs the higher sensitivity, or when the pair must be 8 ohms so SP IMP. can stay on the default.<\/p>\n  <p class=\"purchase-link\"><span class=\"amazon-region-btn\">Check Price on <a href=\"https:\/\/www.amazon.com\/s?k=JBL+Stage+250B&#038;tag=e6890-20&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">Amazon US<\/a>, <a href=\"https:\/\/www.amazon.co.uk\/s?k=JBL+Stage+250B&#038;tag=pctest07-21&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">UK<\/a>, <a href=\"https:\/\/www.amazon.ca\/s?k=JBL+Stage+250B&#038;tag=pctestt-20&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">CA<\/a>, <a href=\"https:\/\/www.amazon.de\/s?k=JBL+Stage+250B&#038;tag=67990-21&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">DE<\/a> \u2192<\/span><\/p>\n<\/div>\n\n<h2>If You Need Something Else<\/h2>\n<p>These three pairs are passive speakers for one set of terminals. The STR-DH190 has no subwoofer pre-out, and its manual sets a higher impedance floor when A and B run together.<\/p>\n\n<div class=\"top-recommendation\" id=\"one-pair-skip\" data-badge=\"also-great\">\n  <div class=\"top-badge badge-also-great\">Also consider<\/div>\n  <h3>One pair on A or B, not both <a href=\"https:\/\/www.amazon.com\/s?k=Klipsch+RP-600M+II&#038;tag=e6890-20&#038;linkCode=osi\" target=\"_blank\" class=\"title-amazon-btn\" rel=\"nofollow noopener\">View on Amazon<\/a><\/h3>\n  <table class=\"spec-table\">\n    <tr><th>A or B alone<\/th><td>6\u201316 ohms (8 ohms or higher uses SP IMP. 8 OHM)<\/td><\/tr>\n    <tr><th>A and B together<\/th><td>12\u201316 ohms<\/td><\/tr>\n    <tr><th>These three pairs<\/th><td>6 ohms or 8-ohm compatible, so one pair at a time<\/td><\/tr>\n  <\/table>\n  <p>Sony\u2019s manual allows a second room on the B posts, and it requires 12 ohms or higher if A and B play at once. The RP-600M II, SS-CS5M2, and Stage 250B are below that. Use speaker A or speaker B, and switch the other set off. A powered speaker with its own amplifier does not use the 90 W outputs. A nominal impedance under 6 ohms is outside the range printed on the receiver.<\/p>\n  <p class=\"purchase-link\"><span class=\"amazon-region-btn\">Check Price on <a href=\"https:\/\/www.amazon.com\/s?k=Klipsch+RP-600M+II&#038;tag=e6890-20&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">Amazon US<\/a>, <a href=\"https:\/\/www.amazon.co.uk\/s?k=Klipsch+RP-600M+II&#038;tag=pctest07-21&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">UK<\/a>, <a href=\"https:\/\/www.amazon.ca\/s?k=Klipsch+RP-600M+II&#038;tag=pctestt-20&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">CA<\/a>, <a href=\"https:\/\/www.amazon.de\/s?k=Klipsch+RP-600M+II&#038;tag=67990-21&#038;linkCode=osi\" target=\"_blank\" rel=\"nofollow noopener\">DE<\/a> \u2192<\/span><\/p>\n<\/div>\n\n<h2>Frequently Asked Questions<\/h2>\n<div class=\"faq-module\">\n  <div class=\"faq-item\"><h3>Why the STR-DH190 wants 6\u201316 ohm speakers<\/h3><p>Sony\u2019s specifications list speaker impedance as 6\u201316 ohms. The owner\u2019s manual repeats that range and tells you to set SP IMP. to 8 OHM when every speaker is 8 ohms or higher, and to 6 OHM when they are lower than 8 ohms. The Klipsch rating is 8-ohm compatible. The Sony and JBL pairs are 6 ohms.<\/p><\/div>\n  <div class=\"faq-item\"><h3>Whether a 4 ohm speaker is safe on this receiver<\/h3><p>Sony\u2019s connection range starts at 6 ohms. A speaker whose nominal impedance is under 6 ohms sits outside that range. The three pairs here are published as 6 ohms or 8-ohm compatible.<\/p><\/div>\n  <div class=\"faq-item\"><h3>Why A and B cannot play these pairs together<\/h3><p>The manual says speakers on both the A and B terminals need a nominal impedance of 12 ohms or higher. Six ohm and 8 ohm pairs are for A or B alone. Switch the unused set off.<\/p><\/div>\n  <div class=\"faq-item\"><h3>What the 90 W and 100 W ratings mean for these speakers<\/h3><p>The manual rates 90 W + 90 W into 8 ohms from 20 Hz to 20 kHz at 0.09% THD. The specification page rates 100 W + 100 W into 8 ohms at 1 kHz and 1% THD. The Klipsch continuous rating is 100 W, the SS-CS5M2 maximum input is 100 W, and the JBL recommended amplifier range is 20\u2013150 W.<\/p><\/div>\n  <div class=\"faq-item\"><h3>Whether a powered speaker uses this receiver\u2019s amplifier<\/h3><p>It does not. Powered speakers have their own amplifiers and line or Bluetooth inputs. The STR-DH190\u2019s speaker posts are for a passive pair. Its inputs are analog, including phono, plus Bluetooth into the receiver itself.<\/p><\/div>\n<\/div>\n\n<h2>Final Verdict<\/h2>\n<div class=\"conclusion-module verdict-box\">\n  <div class=\"verdict-picks\">\n    <div class=\"verdict-item\">\n      <span class=\"verdict-label\">\ud83c\udfc6 Best Overall:<\/span>\n      <div class=\"verdict-product\"><strong>Klipsch RP-600M II<\/strong> <span class=\"verdict-reason\">\u2013 94.5 dB and 8-ohm compatible, matched to the 90\u2013100 W 8 ohm rating.<\/span><\/div>\n      <a href=\"https:\/\/www.amazon.com\/s?k=Klipsch+RP-600M+II&#038;tag=e6890-20&#038;linkCode=osi\" target=\"_blank\" class=\"verdict-btn\" rel=\"nofollow noopener\">Buy Now<\/a>\n    <\/div>\n    <div class=\"verdict-item\">\n      <span class=\"verdict-label\">\ud83d\udc8e Best Value:<\/span>\n      <div class=\"verdict-product\"><strong>Sony SS-CS5M2<\/strong> <span class=\"verdict-reason\">\u2013 6 ohms and 100 W, with SP IMP. set to 6 OHM.<\/span><\/div>\n      <a href=\"https:\/\/www.amazon.com\/s?k=Sony+SS-CS5M2&#038;tag=e6890-20&#038;linkCode=osi\" target=\"_blank\" class=\"verdict-btn\" rel=\"nofollow noopener\">Buy Now<\/a>\n    <\/div>\n    <div class=\"verdict-item\">\n      <span class=\"verdict-label\">\ud83d\udcb0 Budget Pick:<\/span>\n      <div class=\"verdict-product\"><strong>JBL Stage 250B<\/strong> <span class=\"verdict-reason\">\u2013 6 ohms nominal, and 90 W sits inside the 20\u2013150 W window.<\/span><\/div>\n      <a href=\"https:\/\/www.amazon.com\/s?k=JBL+Stage+250B&#038;tag=e6890-20&#038;linkCode=osi\" target=\"_blank\" class=\"verdict-btn\" rel=\"nofollow noopener\">Buy Now<\/a>\n    <\/div>\n  <\/div>\n\n  <p class=\"verdict-summary\">The Klipsch RP-600M II is 94.5 dB and 8-ohm compatible, in line with the receiver\u2019s 90\u2013100 W rating at 8 ohms. The Sony SS-CS5M2 is 6 ohms and 100 W, with the receiver\u2019s SP IMP. set to 6 OHM. The JBL Stage 250B is 6 ohms nominal, and 90 W sits inside its 20\u2013150 W window.<\/p>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>The STR-DH190 is 100 W into 8 ohms and accepts 6\u201316 ohm speakers. The Klipsch RP-600M II is the 8-ohm-compatible pair with 94.5 dB sensitivity.<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"footnotes":""},"categories":[419,268],"tags":[420],"class_list":["post-63965","post","type-post","status-publish","format-standard","hentry","category-receiver","category-speaker","tag-sony-strdh190"],"_links":{"self":[{"href":"https:\/\/www.cameraegg.org\/test\/wp-json\/wp\/v2\/posts\/63965","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.cameraegg.org\/test\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.cameraegg.org\/test\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.cameraegg.org\/test\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.cameraegg.org\/test\/wp-json\/wp\/v2\/comments?post=63965"}],"version-history":[{"count":3,"href":"https:\/\/www.cameraegg.org\/test\/wp-json\/wp\/v2\/posts\/63965\/revisions"}],"predecessor-version":[{"id":69166,"href":"https:\/\/www.cameraegg.org\/test\/wp-json\/wp\/v2\/posts\/63965\/revisions\/69166"}],"wp:attachment":[{"href":"https:\/\/www.cameraegg.org\/test\/wp-json\/wp\/v2\/media?parent=63965"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.cameraegg.org\/test\/wp-json\/wp\/v2\/categories?post=63965"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.cameraegg.org\/test\/wp-json\/wp\/v2\/tags?post=63965"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}