Best Protective Case for Fujifilm X-T50
The Fujifilm X-T50 is 123.8×84.0×48.8 mm and about 438 g with the battery and card. A case for it either stays on while you shoot, closes with a flap, or covers the 16-50mm in a bag. The SmallRig 4710 Leather Half Case Kit for FUJIFILM X-T50 is the 109 g shell that stays on. Check SmallRig 4710 Leather Half Case Kit for FUJIFILM X-T50 on Amazon.
Our Top Picks at a Glance
Reviewed September 2026 · 123.8×84.0×48.8 mm · about 438 g with battery and card · minimum depth 34.2 mm
A 109 g leather half case that stays on. Shoulder strap in the kit, and the battery door stays open.
Check Price at Amazon Read full review ↓MegaGear’s leather case with a top cover. Ports, the card, the battery, and a tripod thread stay usable.
Check Price at Amazon Read full review ↓A neoprene pouch sized for the X-T50 with the 16-50mm. It covers the lens. It does not stay on while you shoot.
Check Price at Amazon Read full review ↓This page contains affiliate links. A purchase through those links may earn Cameraegg a commission at no extra cost to you.
| Case | Job on this camera | Published size | Buy |
|---|---|---|---|
| SmallRig 4710 Leather Half Case Kit for FUJIFILM X-T50 | Half case and shoulder strap | 128.7×47.0×60.0 mm, 109 g ±5 g | Check price |
| MegaGear Ever Ready Leather Half Case for Fujifilm X-T50 | Leather case with a top cover | Genuine leather · tripod and battery access | Check price |
| MegaGear Neoprene Camera Case for Fujifilm X-T50 16-50mm | Pouch for the 16-50mm kit | Neoprene · X-T50 with 16-50mm | Check price |
How We Picked
The X-T50 is a compact dial camera. The case either stays on, closes with a flap, or covers the kit lens in a bag.
- The body is 123.8 mm wide. Fujifilm X-T50 specifications, September 2026: 123.8×84.0×48.8 mm, minimum depth 34.2 mm, about 438 g with the battery and a memory card.
- The half case is the shell with a published size. SmallRig 4710 listing: 128.7×47.0×60.0 mm, 109 g ±5 g, genuine leather and PU, a shoulder strap in the box, for the X-T50. The description leaves the battery compartment, focus mode, and card slot open, and puts a 1/4-inch thread on the bottom.
- The other two are different kinds of case, and neither prints a millimeter size. MegaGear’s Ever Ready listing for the X-T50: genuine leather, a top cover, access to ports, the card, and the battery, and a tripod mount with the case on. MegaGear’s neoprene case is listed for the X-T50 with the 16-50mm, in padded neoprene, and MegaGear calls that material moisture and water resistant. That is not a depth rating.
Detailed Reviews
SmallRig 4710 Leather Half Case Kit for FUJIFILM X-T50 View on Amazon View on B&H
| Dimensions | 128.7×47.0×60.0 mm |
|---|---|
| Weight | 109 g ±5 g |
| Material | Genuine leather and PU |
| In the box | Leather half case, shoulder strap |
| Compatibility | FUJIFILM X-T50 |
Why it fits the X-T50. Fujifilm’s body is 123.8 mm wide and 48.8 mm deep, about 438 g with the battery and card. The 4710 case is 128.7×47.0×60.0 mm and 109 g ±5 g, so the shell is a few millimetres outside the body’s width and about a quarter of the camera’s weight. SmallRig’s description uses a foam grip, suede lining, and an aluminum frame, and mounts with a 1/4-inch screw that still takes a tripod. The battery door, focus mode, and card slot stay open. The strap is PU, and it is a shoulder strap, not a wrist loop.
Buy it when the camera should be protected while you shoot. Skip it for a flap you close in a bag, and skip it when the 16-50mm needs its own pouch. This listing is the brown 4710 kit. A microphone for this body is separate: see the microphone guide for the X-T50.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
MegaGear Ever Ready Leather Half Case for Fujifilm X-T50 View on Amazon View on B&H
| Material | Genuine leather, padded interior fabric |
|---|---|
| Closure | Top cover |
| Access | Ports, card slot, buttons, battery, tripod |
| Compatibility | Fujifilm X-T50 |
Why it fits the X-T50. MegaGear’s Ever Ready case is cut for this body. The top cover is the difference from the open 4710 half case: you flip it and shoot, and MegaGear says the ports, card slot, buttons, and battery stay reachable without taking the case off. A tripod still mounts with the case on. MegaGear does not publish a millimeter size or a weight for this case, so it is not compared here by grams.
Buy it when the camera should close up between shots. Skip it for a published 109 g half case with a shoulder strap, and skip it for a pouch that also covers the 16-50mm.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
MegaGear Neoprene Camera Case for Fujifilm X-T50 16-50mm View on Amazon View on B&H
| Material | Padded neoprene |
|---|---|
| Fit | Fujifilm X-T50 with the 16-50mm |
| Claim | MegaGear calls it moisture and water resistant |
| Use | Bag or travel pouch, camera comes out to shoot |
Why it fits the X-T50. MegaGear sizes this neoprene case for the X-T50 with the 16-50mm, so the lens is inside, not left on the strap. The copy calls the material padded, scratch-resistant, and moisture and water resistant. There is no depth rating next to that phrase, and no published weight. It is a pouch. It does not add a grip or a tripod thread.
Buy it when the kit zoom shares the bag with the body. Skip it if you shoot with the case still on. That is the half case, at 109 g.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
If You Need Something Else
The Ever Ready case is the one with a top cover. The neoprene pouch is the one sized for the 16-50mm.
Frequently Asked Questions
Why the half case is 128.7 mm wide
Fujifilm’s X-T50 is 123.8 mm wide, 84.0 mm tall, and 48.8 mm deep, with a minimum depth of 34.2 mm. SmallRig’s 4710 case is 128.7×47.0×60.0 mm. The extra width is the leather and the frame around a 123.8 mm body.
What the shoulder strap is made of
SmallRig’s 4710 sheet lists genuine leather and PU, and the box is the half case plus a shoulder strap. The description calls that strap PU.
How the top-cover case differs from the open half case
MegaGear’s Ever Ready listing has a top cover you open to shoot, and it keeps port, card, button, battery, and tripod access. The 4710 is an open half case at 109 g ±5 g with a shoulder strap. MegaGear does not print millimeters for the Ever Ready case.
What the neoprene case is sized for
MegaGear lists that pouch for the X-T50 with the 16-50mm. A different lens is a different fit. The moisture and water resistant line is MegaGear’s material claim, not a published dive depth.
What 438 g includes
Fujifilm’s figure is about 438 g with the battery and a memory card, on a 123.8×84.0×48.8 mm body. The 4710 adds 109 g ±5 g. The neoprene pouch and the Ever Ready case do not publish a weight to add to that 438 g.