Best Waterproof Case for Insta360 X6
The X6 will survive a pool without a housing. A 360 stitch in that pool will not. For anyone filming a full sphere underwater, the case is Insta360’s Invisible Dive Case Pro.
Our Top Picks at a Glance
Reviewed August 2026 · X6 is 20 m IP68 bare; 360 underwater still needs the official housing
60 m housing with underwater lenses and auto Dive Case Mode. The only X6 case that keeps the stitch line clear.
Check Price at Amazon Read full review ↓IP67 hard case that actually fits the Dive Case Pro (about 157 × 102 × 99 mm). Waterproof carry, not a dome.
Check Price at Amazon Read full review ↓IP67 box for the bare X6 (50 × 100 × 40 mm). Beach bag and hatch. Not 60 m, not a 360 housing.
Check Price at Amazon Read full review ↓Disclosure: This page contains affiliate links. As an Amazon Associate affiliate, we earn a small commission from qualifying purchases at no extra cost to you.
Comparison Table
| Product | Job | Rating | 360 stitch | Price | Buy |
|---|---|---|---|---|---|
| X6 Invisible Dive Case Pro | Shoot underwater | 60 m · IPX9 housing | Yes, with UW lenses | $179.99 | Check |
| Pelican 1200 | Carry the housing | IP67 | No — lid stays shut | ~$75 | Check |
| Pelican 1060 | Carry the camera | IP67 · 1 m / 30 min | No — lid stays shut | ~$44 | Check |
| X6 unhoused | Splash / rain / 20 m | IP68 · 20 m | Refraction on 360 | $0 | — |
| X5 Invisible Dive Case | Skip | X5 body only | Will not seat on X6 | — | Skip |
| Telesin X4 dive case | Skip | 50 m · X4 only | Wrong camera | ~$80 | Skip |
How We Picked These Cases
- What Insta360 actually rates: The X6 product page is IP68 to 65 ft / 20 m with no case, and 60 m with the Invisible Dive Case Pro plus the included underwater lens. The same page’s footnote says an Invisible Dive Case is recommended for 360 video underwater because water refraction warps the dual fisheyes and breaks the stitch. Waterproof and “usable 360 underwater” are not the same sentence.
- The only X6 housing on the official sheet: Store price is $179.99, X6 only. The kit must be used with the included underwater lenses, in a clean, low-dust setup with humidity below 70% while you swap glass. Wex lists manufacturer part CINSBBXG-01, 60 m, auto housing detection into Dive Case Mode, IPX9, and underwater optics that it describes as clearer than the X5 housing. European listings put the shell at 156.5 × 101.7 × 98.6 mm and 225.8 g, with 12 anti-fog inserts, a weight block, a 1/4″-20 to 3-prong adapter, thumbscrew, and a storage bag. Photospecialist’s “50 m” line is copy from the X5 Pro page; Insta360 and Wex both say 60 m for X6.
- What will not fit, and what is only a box: X6 is shorter and wider than X5, so form-fit X5 (and X4) dive cases do not seat. Telesin S4-WTP-08-TIS / Amazon B0F7XL16ZN is an X4 50 m housing. Pelican’s 1200 interior is about 9.3 × 7.1 × 4.1 in — enough for the Pro if you pluck foam. The 1060 interior is 8.25 × 4.25 × 2.25 in, which takes the bare X6 (50 × 100 × 40 mm) and fails the housing’s ~99 mm thickness. Pelican rates both boxes IP67; the 1060’s sheet is 1 m for 30 minutes. Neither is a shooting dome.
Best Waterproof Case for Insta360 X6: Detailed Reviews
Insta360 X6 Invisible Dive Case Pro View on Amazon View on B&H
| SKU | CINSBBXG-01 |
|---|---|
| Depth | 60 m / 196.8 ft (Insta360 store) |
| Optics | Included underwater lenses required; land Lens 2.0 off |
| Mode | Camera detects the housing and enters Dive Case Mode |
| Shell | 156.5 × 101.7 × 98.6 mm · 225.8 g · IPX9 |
| In the box | 12 anti-fog inserts, weight block, 1/4″-20 to 3-prong, thumbscrew, bag |
| Price | $179.99 official store · about £159 at Wex |
Why it fits the X6. This is the housing Insta360 launched with the camera on 12 August 2026. The shell sits outside the stitch line so the case does not appear in a 360 export. The underwater lenses exist because water and air do not bend light the same way on two fisheyes; the land Replaceable Lenses 2.0 stay in the kit bag. Auto Dive Case Mode is the point of buying official rather than a generic box: the camera knows it is in a dome. The weight block is there because a hollow 360 housing floats. Invisible selfie sticks still disappear if you keep the stick in line with the housing, same as X5/X4. There is no cheaper official “non-Pro” X6 dive case on the store — X5 had a $99 Invisible Dive Case alongside a Pro; X6 folded that into this SKU.
Skip this if you only need rain, pool-deck splash, or single-lens clips above the water. The camera is already IP68 to 20 m. Skip it if you were about to buy an X5 or X4 housing “until Telesin ships X6.” Those shells will not close on this body.
- 60 m rating with X6-shaped optics and auto Dive Case Mode
- Invisible to the stitch line; stick still works for third-person
- Anti-fog pack and weight block in the box
- $180 on top of a $700 camera
- Must swap to the included underwater lenses; humidity limit while swapping
- Amazon US listing may still be a search, not a stable ASIN, this week
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
Pelican 1200 Protector Case View on Amazon View on B&H
| Model | 1200-000-110 (black, Pick N Pluck foam) |
|---|---|
| Seal | IP67 · O-ring lid · purge valve |
| Interior | 9.3 × 7.1 × 4.1 in / 236 × 180 × 104 mm |
| Fits | X6 Invisible Dive Case Pro (~157 × 102 × 99 mm) with foam plucked |
| Does not | Let you record. The lid is closed. |
| Street | About $74–$80 |
Why it sits next to the Pro. The Dive Case Pro is a large, glossy optical shell. It does not belong in a backpack pocket with keys. A 1200 is the smallest Pelican Protector whose interior depth (~104 mm) still clears the Pro’s ~99 mm thickness. That is a tight pluck, not a 1060. You are buying a watertight, crushproof box for boats, beach parking lots, and checked bags — the same job Pelican has sold since the 1200 existed — not a second dive housing. If you never buy the Pro, this size is optional; the 1060 is enough for the camera alone.
Skip this if you are shopping for something to film through. Skip it if the X6 travels without the housing; that is the 1060.
- Interior actually clears the official X6 housing
- IP67, purge valve, lifetime guarantee
- Known ASIN, in stock everywhere
- About $75 for a box that does not shoot
- ~99 mm housing vs ~104 mm interior — foam must be cut
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
Pelican 1060 Micro Case View on Amazon View on B&H
| Model | 1060 Micro (clear/black common) |
|---|---|
| Seal | IP67 · 1 m for 30 minutes on Pelican’s sheet |
| Interior | 8.25 × 4.25 × 2.25 in / 210 × 108 × 57 mm |
| Fits | X6 body 50 × 100 × 40 mm; maybe a spare battery |
| Does not fit | The Dive Case Pro (~99 mm thick) |
| Street | About $35–$44 |
Why it is the budget waterproof case. Most “waterproof case for X6” search results this week are either the $180 official housing or an X4/X5 shell with the title swapped. A 1060 is a real IP67 box that the camera fits, costs less than a third of the Pro, and does the hatch/beach-bag job. It is not a 60 m dome and it will not fix a 360 stitch. If your water use is rain and spray, you do not need this box either — the camera is already sealed — but a hard case still beats a pouch full of sand.
Skip this if you bought the Dive Case Pro and need one box for both. That is the 1200. Skip it if you thought IP67 1 m was a scuba rating.
- X6 body fits; carabiner; cheap
- Actual IP67, not a zipper pouch
- 1 m / 30 min, not 60 m
- Will not accept the Dive Case Pro
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
If You Need Something Else
These are not cheaper Dive Case Pros. One is the stick the housing is meant to disappear with. The rest are the wrong shell or a land cage.
Insta360 114cm Invisible Selfie Stick View on Amazon View on B&H
| SKU | CINSAAVF · commonly listed as 114 cm / 120 cm |
|---|---|
| With the Pro | Keep stick and housing in one plane so the stick stays invisible |
| Skip if | Your X6 Essentials bundle already includes the 114 cm stick |
Insta360 sells the Dive Case Pro on third-person underwater shots. The stick is not waterproof by itself and it is not a case. Magnetic X6 mounts still talk to the same stick family as X5/X4 Air. If Essentials already put a 114 cm stick in the box, do not buy a second one for this article.
Skip this if you only needed a housing or a dry box.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
Telesin Invisible Dive Case for Insta360 X4 View on Amazon View on B&H
| SKU | S4-WTP-08-TIS · Amazon B0F7XL16ZN |
|---|---|
| Rated | 50 m · X4 body only |
| 2026 problem | X6 launched with a different outline; this lid will not be an X6 seal |
Telesin is the usual $80 “invisible” alternative on older X cameras. There is no X6 Telesin housing in this roundup because it is not for sale as an X6 part. Listings that say X6 and show an X4 shell are title spam. Wait for an X6 SKU; do not force an X4 gasket.
Skip this if your camera says X6 on the body. That is the point of this row.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
Insta360 X5 Invisible Dive Case / Case Pro View on Amazon View on B&H
| Fits | X5 only |
|---|---|
| X5 store split | Non-Pro $99.99 to 60 m · Pro often listed to 50 m with different glass |
| X6 | Shorter, wider body; new Pro SKU CINSBBXG-01 |
X5 owners can keep their housing. X6 buyers cannot. Magnetic sticks and many mounts carry over. The dive shell does not.
Skip this if you unboxed an X6 this month.
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
X6 Protective Utility Frame / Standard Lens Guards View on Amazon View on B&H
| Utility Frame | $52.99 · steel cage, silicone buffer, side 1/4″ — land knocks |
|---|---|
| Standard Lens Guards | $27.99 · 7H glass for trail scratches, not a dome |
Both are real X6 parts. Neither is a waterproof case. The frame is the opposite of a sealed housing. Lens guards are for dirt on land; they are not the underwater lenses that ship with the Dive Case Pro. Use them on the trail. Do not take either as a substitute for CINSBBXG-01 in the water.
Skip this if the question you typed was “waterproof.”
Check Price on Amazon US, UK, CA, DE → Check Price on B&H
Frequently Asked Questions
Does the X6 need a waterproof case in a pool?
Not to stay dry at typical pool depth. It is IP68 to 20 m. It needs the Invisible Dive Case Pro if you want 360 video that stitches. Water on two bare fisheyes is a refraction problem, not a drowning problem.
Can I use the land lenses inside the Dive Case Pro?
No. The official store says the case must be used with the included underwater lenses. Swap in a clean, low-dust room under 70% humidity. Put the Replaceable Lenses 2.0 back on when you return to air.
Will an X5 or X4 dive case fit the X6?
No. The X6 body changed. Official X5/X4 shells and Telesin’s X4 housing (S4-WTP-08-TIS) are the wrong gasket. Magnetic sticks are the accessory that usually does carry over.
Is a Pelican a dive housing?
No. 1200 and 1060 are IP67 boxes. You close them, then you walk. The 1060’s rating is 1 m for 30 minutes. The Dive Case Pro is the 60 m shooting shell.
Final Verdict
For 360 underwater on X6, buy the Invisible Dive Case Pro and fit the included underwater lenses. Native 20 m IP68 is for rain and splash, not a stitched sphere. Carry the housing in a Pelican 1200; carry the camera alone in a 1060. Do not put an X5 or Telesin X4 shell on this body, and do not treat the Utility Frame as waterproof.